Spanwise average in StarCCM+
Hi!
I am using StarCCM+ to simulate a 3D hump problem. I have a converged solution of a steady RANS. I have experimental results of specific x-locations where velocity u has been plotted with respect to y. So what I want to do is this. At a specific x location have spanwise average of u-velocity at every y-location. My grid is structured so y-values at every spanwise plane is same. I am able to create a contour plot of u-velocity using DerivedPart -> Plane Section but can't seem to get a hang of how to creare u(spanwise average) versus y at specific x locations. When I try area average it takes the average of every point in the plane and gives one number as the result. Thanks in advance, Subhadeep |
Re: Spanwise average in StarCCM+
How about a line probe or a series of points?
|
Re: Spanwise average in StarCCM+
That's what I am looking at like the mid plane but still statistically would be best to do a spanwise average.
Thanks, Subhadeep |
Re: Spanwise average in StarCCM+
Maybe you can find an answer in the HELP Documentation of CCM+
|
All times are GMT -4. The time now is 07:50. |