# Spanwise average in StarCCM+

 Register Blogs Members List Search Today's Posts Mark Forums Read

 March 30, 2007, 11:39 Spanwise average in StarCCM+ #1 Subhadeep Gan Guest   Posts: n/a Hi! I am using StarCCM+ to simulate a 3D hump problem. I have a converged solution of a steady RANS. I have experimental results of specific x-locations where velocity u has been plotted with respect to y. So what I want to do is this. At a specific x location have spanwise average of u-velocity at every y-location. My grid is structured so y-values at every spanwise plane is same. I am able to create a contour plot of u-velocity using DerivedPart -> Plane Section but can't seem to get a hang of how to creare u(spanwise average) versus y at specific x locations. When I try area average it takes the average of every point in the plane and gives one number as the result. Thanks in advance, Subhadeep

 March 31, 2007, 07:37 Re: Spanwise average in StarCCM+ #2 Ben Guest   Posts: n/a How about a line probe or a series of points?

 March 31, 2007, 09:00 Re: Spanwise average in StarCCM+ #3 Subhadeep Guest   Posts: n/a That's what I am looking at like the mid plane but still statistically would be best to do a spanwise average. Thanks, Subhadeep

 April 12, 2007, 20:46 Re: Spanwise average in StarCCM+ #4 Mclaren Guest   Posts: n/a Maybe you can find an answer in the HELP Documentation of CCM+

 Thread Tools Display Modes Linear Mode

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are On Pingbacks are On Refbacks are On Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post MK Siemens 2 January 19, 2009 10:15 turbinesv CFX 2 November 10, 2008 21:33 TT Main CFD Forum 1 April 11, 2006 14:38 vyom FLUENT 0 January 29, 2006 17:42 vyom FLUENT 0 January 28, 2006 03:17

All times are GMT -4. The time now is 15:13.