CFD Online Discussion Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   Fluent UDF and Scheme Programming (https://www.cfd-online.com/Forums/fluent-udf/)
-   -   UDF for coal gasification (https://www.cfd-online.com/Forums/fluent-udf/46625-udf-coal-gasification.html)

chasevioletsky September 18, 2017 10:16
hi all
I am just learning UDF for the coal devolatilization, combustion and gasification. Could you give me some code examples?
Thanks in advance!
jianjiang92@outlook.com

chasevioletsky September 18, 2017 10:25
I am just learning UDF for the coal devolatilization, combustion and gasification. Could you give me some coade examples?
Thanks in advance!
jianjiang92@outlook.com

rosella January 15, 2018 07:50
Hi, i need to simulate coking process in fluent , in particolar chemical reaction of coal in coke ovens , have you some example file , information, explanation about how i can do it? because i haven't a lot of confidence with fluent.

could someone send me UDF for this coal carbonization/gasification ecc ?

please help

thank you

if you want , send me an e-mail to : r.attrotto@hotmail.it

mankaran90 February 21, 2018 12:44
UDF for biomass combustion
 
Hello people

I am trying to simulate biomass (straw bale) combustion and need a UDF to implement that model involving a solid phase. Could you guys please mail me the udf for biomass combustion at mankaran90@pau.edu . I shall be thankful to you guys. Also, if anyone know any tutorials on writing a UDF for biomass combustion, that would be amazing!! Thanking you guys in advance!!

Mankaran

cesaralonzo March 7, 2018 11:19
gassification fluent
 
I am also working in biomass gasification in fluent, can you please share with me the udf. please.

luisreyesalonzo@gmail.com

rahul8dev April 19, 2018 07:05
I am also doing the same problem of coal gasification.
And I have no idea of the udf which should be made to represent the coal gasification reaction.
Could you send your code to me for study and reference? Thank you very much.
My e-mail is devmakersharda@gmail.com

evrenykn May 3, 2018 03:53
Quote:
Originally Posted by RE13
;146869
Hello,

I have UDF + scheme file for coal devolatilization, combustion, and gasification. I use the discrete phase model in Fluent. Within the define injections panel you will see to the right an option to hook custom laws to your particles. This is where you connect your gasification law to the Fluent solver. Someone else wrote the UDF (it is over 1500 lines) so I am not too comfortable with the physical models/kinetic rate parameters employed, but I am learning fast. I would like to correspond with you on this because we share the same problem.

Regards, AAS
I am learning now a coal combustion on Fluent. Can you give me some examples about UDF, please? My e-mail address: evrenykn@gmail.com

Thank you so much

rahul8dev June 6, 2018 11:05
Respected all Scholar

I am facing problem in simulating Downdraft gasifier in Ansys fluent.I cant able to simulate gasification of biomass inside gasifier.Please help me for reference study material or for some video related to that.On my knowledge I try for 100 times same problem but I cant able to simulate .I am alway oblige to you for this help.

Please Help!!!!!!!!!!!!

Thanks in advance

aliemrekayan August 1, 2018 05:59
Hello,
ı am from Turkey Ali Emre Kayan, i have about biomass(pellet combustion). And i need a matlab code for anysys because i cant directly define biomass gasification in CFD. Can you help me about topic my mail adress: aliemrekayann@gmail.com or aliemrekayan92@gmail.com
Thank you.

yan_crazy July 27, 2019 04:26
I am working with a CFD simulation of a coal gasifier. I am looking for long time about udf of dpm custom ,but have little information.Could you send me the UDF ? Many thanks!!!

yan_crazy July 27, 2019 04:28
I am working with a CFD simulation of a coal gasifier. I am looking for long time about udf of dpm custom ,but have little information.Could you send me the UDF ? Many thanks!!! My email is hymc1234@gamail.com

yx0918 July 30, 2019 05:33
I am working with a CFD simulation of a coal gasifier. I am looking for long time about udf of dpm custom ,but have little information.Could you send me the UDF ? Many thanks!!! My email is yaoxucg@outlook.com

souza.emer October 1, 2019 17:20
coal calculator UDF
 
Hello,

I'm trying to implement new reactions rate for calculator coal combustion using Fluent but I'm doubt of which macro I should use.

Please, can the UDF example be send to my email address?

emersonedilsonbs@hotmail.com

Thanks in advance.


All times are GMT -4. The time now is 19:16.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page