how to set DISPLAY enviroment variable
When I want to use Fluent on a remote computer,it inform me that DISPLAY enviorment variable is not set.My question is how I can set DISPLAY envoirment variable.Thanka a lot
|
Re: how to set DISPLAY enviroment variable
setenv DISPLAY .....:0 ...... is the name of the remote machine..
|
Re: how to set DISPLAY enviroment variable
Hello,Amid:
Thank your help.I set the DISPLAY according to your advice.When I run the FLUENT,it inform me "Error:can't open display.Fluent:error:can't initialize interface". Could you tell me how to deal with this? Thank you a lot Peter |
Re: how to set DISPLAY enviroment variable
Peter What is your operating system?
|
Re: how to set DISPLAY enviroment variable
Hi,Amid:
My remote system is Sun Unix system.My local computer is Windows NT 4.0.Thank you for your reply. Peter |
Re: how to set DISPLAY enviroment variable
ok peter, do as follows: go to DOS promopt in your computer the c:\windows>telnet sun-xxxxx login: xxxxxx password: xxxxxx % setenv DISPLAY ( host id ) %fluent
the above must work with you.. cheeers |
Re: how to set DISPLAY enviroment variable
Peter, they appear as in one line..sorry for that but they must be as follows:
c:\windows>telnet sun-xxxxx login: xxxxxx password: xxxxxx % setenv DISPLAY ( host id ) %fluent |
Re: how to set DISPLAY enviroment variable
Thanx Jim
|
Re: how to set DISPLAY enviroment variable
Thanks Jim and Amid.
Peter |
All times are GMT -4. The time now is 01:26. |