CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FLUENT (https://www.cfd-online.com/Forums/fluent/)
-   -   Urgent please,Boundry condition (https://www.cfd-online.com/Forums/fluent/48887-urgent-please-boundry-condition.html)

raju July 28, 2008 12:28
Urgent please,Boundry condition
 
My stationary tank is open to atm. which is 1/3 filled with water remaining is atm. air.Tank has one inlet and one outlet at bottom...what should i give boundary condition in the open side.

CDE July 28, 2008 18:42
Re: Urgent please,Boundry condition
 
use a Vent boundary condition

Tepin Joe July 29, 2008 04:41
Re: Urgent please,Boundry condition
 
If you are not sure of boundary conditions, use outflow. For this problem it will work.

shyam July 29, 2008 05:12
Re: Urgent please,Boundry condition
 
ok i will try


All times are GMT -4. The time now is 15:37.