need tutorial files(Simulation of Wave Generation in a Tank)
 

hello
i downloaded files of this tutorial from fluent.com but they are compatible with 6.3.28 and my solver is 6.3.21,could anybody please send me files of this tutorial(Simulation of Wave Generation in a Tank) that are older and are compatible with 6.3.21?
thanks

Why do you say they are incompatible with 6.3 version? As the tutorial was made for 6.2, and as far as I remember I did it with the same version of fluent.

hi
i have this problem too
the error said its for fluent 6.3.28
i have 6.3.26

even i am facing the same problem. can someone please help out.

the same problem...
 

I've the same problem of yours!!
I think the simulation of wave generation in tank compatible for 6.3 version only. and it can run by 6.3.26. Ver 6.3.21 is demo version.
because i cannot find the 6.3.28 program on the net.
I have heard that the latest ver of FLUENT 12. Maybe it can work on this too!!:p

I am currently using ver 6.3.26 but it doesnt work in it. I guess it works only on 6.3.28 . A kind request to all the masters, to kindly design and create a mesh files for us noobs! Thanks in advance!

Hi...
Does it say it'S incompatible when you try to load the Libudf file?

libudf... It means you need to recompile the source code according to your processor architecture and what operational system you are using. libudf is defined most likely as C file. There are also already compiled files, but what I see it means the original C file needs to be recompiled using fluent build in compiler. Try to look in Fluent documentation, it is pretty well explained.

exactly...

I'm still have problem
 

I'm still have a problem. The recompile proses not running yet. It's still error. In the GUI written "nmake not recognized...".
May anybody can help me coz I'am an amateur in Fluent and still learning.
Thank's

Good news
 

I have done. Everything because the C++ and set Environment

hi, can you give me a copy of the files about this tutorial?
thanks:)

hi, do you have the files of the tutorial "Simulation of Wave Generation in a Tank", i can't find them in Fluent.com. now i have a project about oil tank which is analyzed by Fluent software. i need the libudf.c file coz i'm a learner in udf.
thanks very much:)

check this http://www.fluent.com/software/sf_me...orial_wave.htm
teguhtf

Thanks a lot for your reply, I get it~:):):)

How to save post pocessing data automatically?
 

Now, I want to capture Total Pressure every member or wall in my case. Can I get it automatically when iterate the program?
Maybe You can tell me how execute command work? Can I use it to solve my problem?

Hi all,

I am studying "wave generation in a tank" tutorial to research my problem. However, I could not find "libudf" or "wave.msh" file to study them. Anybody can send me these file? I really need them to study my problem. Thanks for your help.
my email: trantoan2008@gmail.com

Dear: trontoan2008

Can U tell me, what series Fluent software do you have? Cos not all libudf can be used. Most of them we must build by C++ software.

Hi Freeday,

I am using Fluent V6.3.26 s/w. I think If we have udf file, we can build it in Fluent based on C++ s/w. So, if you have this udf, please send to me.

I appriciate your helping.
Best regards,

I need your anothe remail address. Because trantoan2008@gmail.com is invalid.

Hi Freeday,
My remail address is trantoan_2008@yahoo.com.vn. Thank for your help.

Best regard,

Hi freeday,
I also have some abstacles with the "Wave Generation in a Tank" problem. By the way, could you send me the libudf folder? If it's not trouble, please send me the UDF Source and Header files, so I can build it
My email is: inokoshiai@yahoo.com
Thank you so much

Dear Inokoshiai,
Thank you for ask me to help your obstacles. But, I'm really sorry because the source is confidential. You need doctor level to make your own source. I think you could ask your professor to make it.

Regards,
freedy

http://www.linkedin.com/pub/defri-sumarwan/2b/a5/7b4

hi
 

would u please send wave.msh file for me. thank you:) email: bordbar_vahid_280@yahoo.com

Get time plot for history of wave elevation of a determine point in NWT
 

Dear friends

I m working with fluent 6.3 ,I modelled a wave tank in fluent, it modelled successfuly and I want to get time plot about the history of wave elevation at a specified point for example x=7.5,y=0.5 (in fluent I accentuate this matter again) in a wave tank with these dimensions: L=15m, H=0.8m for a detemined time domain which is smaller than wave tank modeling time domain.

if any friend know, please guide me and give me the tips and tricks about it.



With kind regards.

hello
i have the same problem too
the error for udf file said its for fluent 6.3.28 but i have 6.3.26
please somebody help:(

kindly share that file with me. i will be very grateful to you..my email nazir883@yahoo.com

Hi, I wonder if anyone could share the files with me. hesabi@gmail.com

please kindly send wave.msh file for me. thank you very much email: joni2108@gmail.com

hi gholamghar
I need tutorials files"Simulation of Wave Generation in a Tank"
In particular, the udf of moving wall
can you send me this file??
thank you

my mail:
Ahmadi_ahmad68@yahoo.com

Hi everybody,
I also need the tutorials files wave.msh and libudf folder.
Could you please email it to me: slayerhellsing@gmail.com

Thanks

Hi guys ,

I also need the tutorial files wave.msh and libudf folder. Could someone please send them to me?
I would really appreciate it.

mail: sysmod@gmx.de

Wave.msh and libudf files
 

Hi guys ,

I also need the tutorial files wave.msh and libudf folder. Could someone please send them to me?
I would really appreciate it.

mail - pddeole@mtu.edu

Hi
download link : http://bit.ly/1hQpr4g

I couldn't download the wave.msh and udf from the linked you have quoted. May I ask to upload the files here? many thanks in advance

password for winrar file
 

Downloaded the file, but can't open cause password is needed

Looking for wave.msh and libudf from Fluent tutorial 10
 

Hi guys,

I am currently working on a sloshing tank simulation, and I need the wave.msh and libudf file from ANSYS fluent tutorial 10 (simulation of wave generation in a tank) urgently. Can anyone please send the file to me? My email is shikyuan1994@gmail.com. Appreciate a lot if you can help me.

Hi kemin, have you been able to open the link http://bit.ly/1hQpr4g?

Sorry I can't open the file

I see. By the way kemin, do you have any mean getting the mesh file by now?