Hi all, after increasing th
 

Hi all,

after increasing the level of surface refinement higer than 4 snappyhexmesh hangs:

(gdb) where
#0 0x00002b3e3005a130 in Foam::List<foam::pointindexhit<foam::vector<double > > >::setSize ()
from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libautoMesh.so
#1 0x00002b3e3271f51d in Foam::triSurfaceMesh::findLineAll () from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libmeshTools.so
#2 0x00002b3e3004f453 in Foam::refinementSurfaces::findAllHigherIntersectio ns ()
from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libautoMesh.so
#3 0x00002b3e3004794d in Foam::meshRefinement::markSurfaceCurvatureRefineme nt ()
from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libautoMesh.so
#4 0x00002b3e30049188 in Foam::meshRefinement::refineCandidates ()
from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libautoMesh.so
#5 0x00002b3e2ffd6cd0 in Foam::autoRefineDriver::surfaceOnlyRefine ()
from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libautoMesh.so
#6 0x00002b3e2ffd945f in Foam::autoRefineDriver::doRefine () from /home/brblo/OpenFOAM/OpenFOAM-1.5/lib/linux64GccDPOpt/libautoMesh.so
#7 0x0000000000406036 in main ()

If you have a testcase I can h
 

If you have a testcase I can have a look at it.

Matthijs, thanks for that o
 

Matthijs,

thanks for that offer. I will look what I can do for you. However it is very difficult for me to find the problematic regions of my geometry. Regards.

BastiL

Dear all, this plroblem has
 

Dear all,

this plroblem has been solved with the lates development version. Thanks, great job.