CFD Online Discussion Forums - [snappyHexMesh] Debug option in snappy / Write volScalarField with cellLevel for postprocessing

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- OpenFOAM Meshing & Mesh Conversion (https://www.cfd-online.com/Forums/openfoam-meshing/)

- - [snappyHexMesh] Debug option in snappy / Write volScalarField with cellLevel for postprocessing (https://www.cfd-online.com/Forums/openfoam-meshing/128784-debug-option-snappy-write-volscalarfield-celllevel-postprocessing.html)

Debug option in snappy / Write volScalarField with cellLevel for postprocessing

Dear Foamers,

every now and then I try to set the debug option in snappy from 0 to 2, as it would be a nice and easy way to display cellLevels in paraview. Anyway, I am getting errors and snappy doesn work properly. I use OF 2.2.2.

Code:

// Advanced



// Flags for optional output

// 0 : only write final meshes

// 1 : write intermediate meshes

// 2 : write volScalarField with cellLevel for postprocessing

// 4 : write current intersections as .obj files

debug 0;

1.) Is this a common problem?
2.) If not, is there a workaround this problem?
3.) Is there another way to obtain cellLevels for paraview postProcessing?

Thanks and best regards
Julian

Hi,

although it is a little out of date, I am still interested in a solution of this problem. Any thoughts?

Best regards
Julian