|
[Sponsors] |
[snappyHexMesh] Debug option in snappy / Write volScalarField with cellLevel for postprocessing |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 21, 2014, 09:33 |
Debug option in snappy / Write volScalarField with cellLevel for postprocessing
|
#1 |
Member
Julian Langowski
Join Date: May 2011
Location: Bremen, Germany
Posts: 91
Rep Power: 15 |
Dear Foamers,
every now and then I try to set the debug option in snappy from 0 to 2, as it would be a nice and easy way to display cellLevels in paraview. Anyway, I am getting errors and snappy doesn work properly. I use OF 2.2.2. Code:
// Advanced // Flags for optional output // 0 : only write final meshes // 1 : write intermediate meshes // 2 : write volScalarField with cellLevel for postprocessing // 4 : write current intersections as .obj files debug 0; 2.) If not, is there a workaround this problem? 3.) Is there another way to obtain cellLevels for paraview postProcessing? Thanks and best regards Julian
__________________
πάντα ῥεῖ - Heraclitus |
|
March 30, 2014, 09:57 |
|
#2 |
Member
Julian Langowski
Join Date: May 2011
Location: Bremen, Germany
Posts: 91
Rep Power: 15 |
Hi,
although it is a little out of date, I am still interested in a solution of this problem. Any thoughts? Best regards Julian
__________________
πάντα ῥεῖ - Heraclitus |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Centrifugal fan-reverse flow in outlet lesds to a mass in flow field | xiexing | CFX | 3 | March 29, 2017 11:00 |
Simple piston movement in cylinder- fluid models | arun1994 | CFX | 4 | July 8, 2016 03:54 |
Ansys CFX problem: unexpected very high temperatures in premix laminar combustion | faizan_habib7 | CFX | 4 | February 1, 2016 18:00 |
Compression stoke is giving higher pressure than calculated | nickjuana | CFX | 62 | May 19, 2015 14:32 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 04:32 |