jayaweerajmn |
April 24, 2023 00:23 |
Dynamic Mesh running Error
case and solver with dynamic mesh were worked properly in open foam-dev version. I reinstalled open foam-dev and run the case. below error is displayed.
error
PHP Code:
Create timeCreate mesh for time = 0Selecting fvMeshMover motionSolverSelecting motion solver: velocityLaplacianUsing dynamicCode for codedFixedValue dRPointMotion at line 25 in "/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall"Invoking "wmake -s libso /home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/dynamicCode/dRPointMotion"wmake libso /home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/dynamicCode/dRPointMotion wmkdep: codedFixedValuePointPatchFieldTemplate.C Ctoo: codedFixedValuePointPatchFieldTemplate.C/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall: In member function ‘virtual void Foam::dRPointMotionFixedValuePointPatchVectorField::updateCoeffs()’:/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall:31:41: error: missing template arguments before ‘patchInterpolator’/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall:44:24: error: ‘patchInterpolator’ was not declared in this scopemake: *** [/opt/openfoam-dev/wmake/rules/General/transform:26: Make/linux64GccDPInt32Opt/codedFixedValuePointPatchFieldTemplate.o] Error 1--> FOAM FATAL IO ERROR: Failed wmake "dynamicCode/dRPointMotion/platforms/linux64GccDPInt32Opt/lib/libdRPointMotion_55b650df0e385e1364b03aa2ef8f931e10e26bff.so"file: /home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall from line 25 to line 59. From function void Foam::codedBase::createLibrary(Foam::dynamicCode&, const Foam::dynamicCodeContext&) const in file db/dynamicLibrary/codedBase/codedBase.C at line 209.FOAM exiting
|