[jayaweerajmn]

case and solver with dynamic mesh were worked properly in open foam-dev version. I reinstalled open foam-dev and run the case. below error is displayed.



error

PHP Code:

Create timeCreate mesh for time = 0Selecting fvMeshMover motionSolverSelecting motion solver: velocityLaplacianUsing  dynamicCode for codedFixedValue dRPointMotion at line 25 in  "/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall"Invoking "wmake -s libso /home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/dynamicCode/dRPointMotion"wmake libso /home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/dynamicCode/dRPointMotion    wmkdep: codedFixedValuePointPatchFieldTemplate.C    Ctoo: codedFixedValuePointPatchFieldTemplate.C/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall:  In member function ‘virtual void  Foam::dRPointMotionFixedValuePointPatchVectorField::updateCoeffs()’:/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall:31:41:  error: missing template arguments before ‘patchInterpolator’/home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall:44:24:  error: ‘patchInterpolator’ was not declared in this scopemake: ***  [/opt/openfoam-dev/wmake/rules/General/transform:26:  Make/linux64GccDPInt32Opt/codedFixedValuePointPatchFieldTemplate.o]  Error 1--> FOAM FATAL IO ERROR: Failed wmake  "dynamicCode/dRPointMotion/platforms/linux64GccDPInt32Opt/lib/libdRPointMotion_55b650df0e385e1364b03aa2ef8f931e10e26bff.so"file:   /home/nayana/OpenFOAM/nayana-dev/run/firing/clayFoam-21-04/clayP/0/pointMotionU/boundaryField/boundaryWall  from line 25 to line 59.    From function void Foam::codedBase::createLibrary(Foam::dynamicCode&, const Foam::dynamicCodeContext&) const    in file db/dynamicLibrary/codedBase/codedBase.C at line 209.FOAM exiting