what is h in a sprayFoam simulation
 

Hi everyone,

I'm wondering what is "h" in a sprayFoam simulation.

DILUPBiCG: Solving for O2, Initial residual = 1.33345e-05, Final residual = 1.4687e-10, No Iterations 2
DILUPBiCG: Solving for H2O, Initial residual = 0, Final residual = 0, No Iterations 0
--> DILUPBiCG: Solving for h, Initial residual = 0.0271436, Final residual = 4.06907e-09, No Iterations 3
T gas min/max = 213.736, 368.37

Besides, I'm surprised that the temperature reach a higher level than 320K as there is no chemical reactions, no combustions and the ambient air temperature is set to 293 K at the beginning and particle temperature is set to 320K...

Regards,