CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > OpenFOAM > OpenFOAM Running, Solving & CFD

what is h in a sprayFoam simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   December 14, 2016, 14:53
Default what is h in a sprayFoam simulation
New Member
thomas peret
Join Date: Jul 2016
Posts: 6
Rep Power: 9
tperet is on a distinguished road
Hi everyone,

I'm wondering what is "h" in a sprayFoam simulation.

DILUPBiCG: Solving for O2, Initial residual = 1.33345e-05, Final residual = 1.4687e-10, No Iterations 2
DILUPBiCG: Solving for H2O, Initial residual = 0, Final residual = 0, No Iterations 0
--> DILUPBiCG: Solving for h, Initial residual = 0.0271436, Final residual = 4.06907e-09, No Iterations 3
T gas min/max = 213.736, 368.37

Besides, I'm surprised that the temperature reach a higher level than 320K as there is no chemical reactions, no combustions and the ambient air temperature is set to 293 K at the beginning and particle temperature is set to 320K...

tperet is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Waterbell Simulation o.b.m Fluent Multiphase 1 November 5, 2015 05:55
setting up a simulation with multiple interactions phandy OpenFOAM Running, Solving & CFD 1 October 6, 2014 03:16
mass flow rate issue in supersonic nozzle simulation xkang FLUENT 0 July 31, 2014 16:06
Simulation of a complex wing in solidworks flow simulation niels1900 FloEFD, FloWorks & FloTHERM 6 April 20, 2011 10:44
Continuous vs interrupted simulation sega OpenFOAM Running, Solving & CFD 4 November 3, 2008 14:29

All times are GMT -4. The time now is 21:53.