CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home >

CFD Events Calendar, Upcoming Events

Application Area Filter:
Special Fields Filter:
Software Filter:
Sort by:
Type of Event Filter:
Location Filter:

Upcoming Event 1 - 64 of 64, Sorted by Start Date:

September, 2016
  • 8 Day Axial Compressor Online Training
    Online Event, September 19, 2016

    This axial compressor design course covers a broad range of topics from general compressor layouts to a detailed approach of flow path aerodynamic design, including axial compressor analysis, optimization, mixed flow compressor design, and axial fan design. The extensive theoretical session is supported by multiple examples and exercises which bring a practical understanding of the topics explored.

  • Introduction to CFD Analysis for Chemical Process Engineers An Online Instructor Led Training Course
    Online Event, September 28, 2016

    The objective of the course is to introduce process engineers to CFD analysis and discuss how CFD results can be used to solving mixing problems. The course will cover the basic aspects of CFD.

  • Free Webinar: Rocket Engine Turbopump
    Online Event, September 29, 2016

    This one-hour webinar begins with a brief introduction to liquid rocket engines and rapidly brings attendees to the design and optimization of turbopumps in the AxSTREAM® platform. At the turbomachinery component level a turbopump reduces to the fuel pump, oxidizer pump, and turbine which are discussed in the webinar.

  • Aerospace ECS – Cabin Design and Analysis Using Thermo-Fluid System Simulation
    Online Event, September 29, 2016

    View this presentation to learn about thermo-fluid system design for a cabin distribution in an aerospace environmental control system using 1D CFD.

  • Increasing CFD Simulation Throughput for Real, Complete Pump Systems
    Online Event, September 29, 2016

    By participating in this webinar, you will gain a greater understanding of how to Ssimulate complex flow behavior in real, complete pump systems by using 3-D CAD geometry as-is – without needing to simplify your systems and introduce approximations which reduce the accuracy of your simulation results - and more!

October, 2016
  • Advanced diploma on CFD analysis -300 hours Inhouse programme
    Course, Niharika Institute of Computational Engineering, Bangalore, India, October 1, 2016

    Course offered in two levels(level 01 and Level 02).Admission to level 02 is only for those who successfully completes level 01. Please visit our website for more details. http://nicecfd.com/advanced-diploma-on-cfd-analysis.php Classes - about 5 hours perday (Theory + practicals).Theory most probably from 5 PM to 7 PM (Monday to saturday)

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-October-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 3 hours per day.

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-October-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 3 hours per day.

  • OpenFOAM Course
    Course, Euston House, 24 Eversholt Street, London, United Kingdom, October 3, 2016

    OpenFOAM Foundation and Advanced trainings (each for 2 days) bring the essential knowledge of OpenFOAM software. After the trainings the users will be able to run OpenFOAM cases, understand where to find relevant information, use efficiently snappyHexMesh mesh generator, use Function Objects and other features of OpenFOAM.

  • NUMECA SEMINAR - TAKING YOUR TURBOMACHINERY DESIGN TO THE NEXT LEVEL!
    Seminar, Marriott hotel, Zürich, Switzerland, October 3, 2016

    Join us for a seminar in Turbomachinery Design and discover our new integrated 1D to 3D offer in collaboration with Concepts NREC.

  • Mixing In Stirred Tanks - A One Day Training on October 5th, 2016 at New Burnswick,NJ.
    Workshop, Rutgers University Inn and Conference Center, new brunswick, United States, October 5, 2016

    The course will review principles of mixing in stirred tanks, provide recommendations for process design and scale-up, plus enable participants to apply these principles and recommendations to their mixing processes/problems.

  • Live Webinar: Water Resource Recovery Facilities
    Online Event, October 6, 2016

    Please join Flow Science for a live webinar that will focus on modeling several key process units that are found in Water Resource Recovery Facilities.

  • Applied CFD and FEM
    Workshop, College of Enginnering, Cherthala, India, October 9, 2016

    This course has been designed to provide SKILL to the students/faculty/industry engineers on industry standard tools and practices using Applied CFD and Applied FEM. At the end of the course, the participants are expected learn the theory as well as quality meshing and analysis techniques of various types (1D, 2D, 3D in FEM, CFD problems)

  • ERCOFTAC CFD for Dispersed Multiphase Flows, VII, SWEREA, Stockholm, Sweden, 10-11 October 2016
    Course, KTH, Stockholm, Sweden, October 10, 2016

    The simultaneous presence of different phases in external or internal flows such as gas, liquid and solid are found in numerous industries, & termed multiphase flows. E.g. are gas-liquid transportation, crude oil recovery, bubble column reactors & spray for food processing. Existence of the different phases requires a detailed understanding of the interfacial transport phenomena. The course objective - a BPG, latest trends & a trouble shooting session.

  • 4th OpenFOAM User Conference 2016
    Conference, Cologne, Germany, October 11, 2016

    Bringing together users and developers of OpenFOAM

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-October-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 3 hours per day.

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-October-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, October 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 3 hours per day.

  • Midwest OpenFOAM Users' Group Meeting
    User Conference, 1701 Wright St., Madison, United States, October 15, 2016

    OpenFOAM meeting on a variety of applications.

  • ASME's EL513 - Introduction to Computational Fluid Dynamics
    Online Event, October 17, 2016

    This online course provides an introduction to the scientific principles and practical engineering applications of CFD. Although it provides an overview of some of the fundamental mathematical equations governing the fluid flow and heat transfer phenomena, its emphasis is not to teach the theory behind the technology but to help the participants apply the knowledge gained into practical use of commercial CFD codes, particularly ANSYS Fluent.

  • 6th EASN International Conference on Innovation in European Aeronautics Research
    Conference, Porto, Portugal, October 18, 2016

    The 6th EASN International Conference is designed to be the year’s leading forum for discussion and exchange of information about state- of-the-art research and development activities in Aeronautics and Air Transport.

  • The 7th International Symposium on Fluid Machinery and Fluids Engineering
    Conference, LOTTE City Hotel, Jeju, South Korea, October 18, 2016

    The 7th International Symposium on Fluid Machinery and Fluids Engineering (ISFMFE-2016) will be held at LOTTE City Hotel, Jeju, Korea on October 18-22, 2016. Over time, the ISFMFE becomes one of the world’s most important conferences for engineers and scientists for fluid machinery and fluids engineering. The event will focus on various areas in the fluid mechanics in turbomachinery, heat transfer, design, thermo- and fluid dynamics and micro and nano systems etc.

  • Altair Technology Conference ATCx - Getting Serious with CFD
    User Conference, Poststrasse 6, Frankfurt, Germany, October 18, 2016

    Auf der ATCx CFD erfahren Sie, wie branchenfuerhrende Unternehmen einen simulationsgetriebenen Designprozess und Altairs CFD Technologie erfolgreich anwenden, um innovative, profitable Produkte schneller zu entwickeln. Geplant sind Beitraege von: GKN, Magna Powertrain, SAS, Siemens, Stanley Black & Decker, Street Scooter, Visteon und weiteren.

  • ERCOFTAC - Uncertainty Management & Quantification in Industrial Analysis and Design, U. Ghent, Belgium, 27-28 October 2016
    Course, Univ of Ghent, Ghent, Belgium, October 27, 2016

    UM&Q is a new paradigm in industrial analysis and design as it aims at taking into account the presence of numerous uncertainties affecting the behaviour of physical systems. Product success rests on careful management and control of risk wrt interacting uncertainties. The aim is to share how UM&Q is expressed in the fields of Aerospace, Formula 1 and Power generation, and review emerging methods, techniques and deployment.

  • Training Course Basic, intermediate and Advance (Lima - Perú)
    Course, Av. Tupac Amaru 210 - Puerta 4B, Lima - Peru, Spain, October 31, 2016

    Training basic and intermediate in the use of software computational fluid dynamic open source (OpenFOAM). Teaching knowledge in object orientation and c ++ programming language and advanced concepts applied to OpenFOAM.

November, 2016
  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • fast Track Batch on CFD with OpenFOAM
    Course, Chinchwad, Pune, India, November 1, 2016

    This course is for you, if you are: New to OpenFOAM || You have partial training in OpenFOAM || Want to develop proficiency in CFD / OpenFOAM || Want to simplify the use of OpenFOAM || PG Student, Research Scholar, starting career in CFD || R&D person either in industry / lab etc

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 2 hours per day , Lab/practical training 3 hours per day.

  • Advanced diploma on CFD analysis -300 hours Inhouse programme
    Course, Niharika Institute of Computational Engineering, Bangalore, India, November 1, 2016

    Course offered in two levels(level 01 and Level 02).Admission to level 02 is only for those who successfully completes level 01. Please visit our website for more details. http://nicecfd.com/advanced-diploma-on-cfd-analysis.php Classes - about 5 hours perday (Theory + practicals).Theory most probably from 5 PM to 7 PM (Monday to saturday)

  • ERCOFTAC - Best Practices in Combustion CFD - I.C. Engines, 2-3 Nov 2016, TU Darmstadt, Germany
    Course, TU Darmstadt, Darmstadt, Germany, November 2, 2016

    Design and operation of modern combustion I.C engines faces the need of combining high efficiency with low pollutants emissions. CFD has become a powerful tool in this sector. Many models exist, each having a range of applicability, computational cost and accuracy. Thus, CFD experts involved in I.C. Engine simulations, given usual CFD skills, need specific insight and knowledge in spray and combustion modelling, in order to conduct thorough analysis. The present course addresses this need.

  • ERCOFTAC-High Order Methods for Industrial CFD, 3-4 Nov 2016, NUMECA, Brussels, Belgium
    Course, NUMECA, BRUSSELS, Belgium, November 3, 2016

    Aims:Assess how HOM could impact general Industrial CFD in the near future. Although the impact of HOM for RANS simulations has still to be confirmed, the impact on unsteady simulations, such as LES/DNS is already considered as significant. Applications and methods are offered. Also, how HOM can deliver higher accuracy, in shorter timescales, thence, evaluate the potential of HOM. Q&A sessions ensure the knowledge and techniques provided are well observed, leading to capability in implementation.

  • International Conference on Computational Physics, Mathematics and It’s Application ( ICCPMA 2016 )
    Conference, Keio Plaza Hotel, 2-2-1 Nishi-Shinjuku, Shinjuku-Ku, Tyoko, Japan, November 7, 2016

    bring together computational scientists, leading academics, researchers and research scholars to exchange and share their experiences and research results about all aspects of Computational Physics and Mathematics

  • TRAINING: Surface Preparation with CONVERGE
    Course, 21500 Haggerty Road, Suite 120, Livonia, United States, November 7, 2016

    This ​course ​offers ​an ​introduction ​to ​surface ​ preparation ​in ​CONVERGE ​ Studio ​v2.3.

  • 14th Multiphase Flow Workshop - Short Course and Conference
    Conference, Helmholtz-Zentrum Dresden-Rossendorf, Dresden, Germany, November 8, 2016

    Multiphase flows are of great interest to a large variety of industries. The power generation, nuclear reactor technology, food production, chemical process, aerospace and automotive industries are all driving forces in this complex field. The goal of the workshop is to bring together experimental and numerical practitioners, and to foster discussion and exchange of knowledge. Experts from both areas are called upon to present their research and application results to a worldwide audience.

  • Large Eddy Simulation (LES), hybrid LES-RANS, Detached Eddy Simulation (DES) and unsteady RANS.
    Course, Chalmers University of Technology, Gothenburg, Sweden, November 9, 2016

    A three-day course

  • TRAINING: Internal Combustion Engine Modeling in CONVERGE
    Course, 21500 Haggerty Road, Suite 120, Livonia, United States, November 9, 2016

    This ​two-day ​course ​offers ​an ​introduction ​to ​ CONVERGE ​v2.3 ​for ​ internal ​combustion ​(IC) ​engine ​modeling. ​You ​will ​ learn ​about ​the ​ CONVERGE ​solver ​and ​modeling ​options ​while ​working ​ through ​a ​ typical ​IC ​engine ​case ​from ​start ​to ​finish. ​

  • Annual Meeting on Rheology
    Conference, Meliá Alicante, Alicante, Spain, November 10, 2016

    Rheology 2016 is a scientific gathering that guarantees the offering, thoughts and ideas which will enable and secure you the theme "Prism of Possibilities and Potentialities to Illuminate Rheology Science''. It provides a premier technical forum for reporting and learning about the latest research and development, as well as for launching new applications and technologies.

  • International Conference on Computer Science , Engineering and Applied Science ( ICCSEAS 2016 )
    Conference, Namba Oriental Hotel, 2-8-17 Sennichimae, Chuo Ward, Osaka, Japan, November 11, 2016

    The ICCSEAS 2016 Conference offers a great opportunity to bring together professors, researchers, Scientists, Engineers, Academician and scholars around the globe a great platform to deliver the latest innovative research result and the most recent development and trends in Computer Science , all kinds of engineering and applied sciences field

  • Expert course: Computational Fluid Dynamics (CFD) for maritime applications
    Course, Haagsteeg 2, Wageningen, Netherlands, November 14, 2016

    MARIN organises an expert course designed to reflect the latest experience in the application of Computational Fluid Dynamics (CFD) for ship design, offshore engineering and renewable energy applications. To obtain reliable and accurate CFD results for these applications, application-specific choices and ‘best practice’ will be presented.

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 4 hours per day , Lab/practical training 4 hours per day.

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-November-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, November 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • Computational Fluid Dynamics (CFD) with OpenFOAM
    Course, Department of Mechanical Engineering, VNIT, Nagpur, India, November 19, 2016

    The objective of the present training program is to appreciate the open source CFD code OpenFOAM and simplify OpenFOAM use. This training gives a platform to the participant to understand OpenFOAM from basics to advanced to programming level. 

  • Lloyd's Register's workshop on ship scale hydrodynamic computer simulation
    Workshop, Lloyd’s Register's Global Technology Centre, Southampton, United Kingdom, November 25, 2016

    Lloyd’s Register is hosting a ship scale hydrodynamics simulation workshop on 25 November 2016, at their Global Technology Centre in Southampton.

  • Symposium on Innovative Simulations in Turbomachinery
    Conference, SORAT Insel-Hotel, Regensburg, Germany, November 28, 2016

    Invitation & Call for Presentations open: The symposium on 28 & 29 November 2016 in Regensburg, Germany, will offer a forum on innovative simulation technology for all areas of turbomachinery.

  • LES4ICE'16
    Conference, Rueil-Malmaison (near Paris), France, November 30, 2016

    Large-Eddy Simulation for Internal Combustion Engines 2016

December, 2016
  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 4 hours per day , Lab/practical training 4 hours per day.

  • Advanced diploma on CFD analysis -300 hours Inhouse programme
    Course, Niharika Institute of Computational Engineering, Bangalore, India, December 1, 2016

    Course offered in two levels(level 01 and Level 02).Admission to level 02 is only for those who successfully completes level 01. Please visit our website for more details. http://nicecfd.com/advanced-diploma-on-cfd-analysis.php Classes - about 5 hours perday (Theory + practicals).Theory most probably from 5 PM to 7 PM (Monday to saturday)

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 01-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 1, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • Computational Fluid Dynamics (CFD) with OpenFOAM
    Course, Department of Mechanical Engineering, VNIT, Nagpur, India, December 8, 2016

    The objective of the present training program is to appreciate the open source CFD code OpenFOAM and simplify OpenFOAM use. This training gives a platform to the participant to understand OpenFOAM from basics to advanced to programming level. 

  • 10days certificate course on "Hydrodynamic stability and dynamo theory"
    Course, National Institute of Technology, warangal, warangal, India, December 9, 2016

    During the course the following topics will be covered Foundations of Magnetohydrodynamics, Dynamics of Rotating Fluids, Numerical Simulations of Dynamos and Natural Dynamos.

  • 15 days batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Theory 4 hours per day , Lab/practical training 4 hours per day.

  • 6th International & 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP-2016)
    Conference, Department of Applied Mechanics, Allahabad, India, December 15, 2016

    FMFP is the most important conferences in the area of Fluid Mechanics and Fluid Power in India organised at one of the premier institutions of India every year under the aegis of the National Society of Fluid Mechanics and Fluid Power.

  • One Month Evening /Morning batch-Industry oriented course on CFD (ANSYS FLUENT, CFX and ICEMCFD HEXA),from 15-December-2016
    Course, Niharika Institute of Computational Engineering, Indiranagar ,Bangalore, India, December 15, 2016

    Industry oriented course on CFD covering theory,ANSYS FLUENT,ANSYS CFX and ANSYS ICEMCFD (HEXA) softwares.Classes on all seven days of the week. Evening batch for working professionals: 5: 30 Pm onwards Morning batch from : 10:30 AM onwards

  • 3rd International Conference on Computational Methods in Engineering and Health Sciences , Dec 2016, Japan
    Conference, Tobata Campus, Kyushu Institute of Technology, Kitakyushu, Japan, December 17, 2016

    Two day International Conference on Computational Methods in Engineering and Health Sciences (ICCMEH-2016) serves the purpose of bringing together the computational scientists and engineers and medical fraternity from various interdisciplinary domains under a common forum. The theme of this conference will be broad covering several analytical and numerical techniques, and novel applications of computational techniques to solve problems in engineering, health sciences disciplines

  • Twelfth International Conference of Fluid Dynamics (ICFD12)
    Conference, Le Méridien Pyramids Hotel , Cairo, Egypt, December 19, 2016

    The goals of the conference are to provide a forum for the development of experimental and computational methods and tools, to foster cross-fertilization among different fields of application, and most notably to enable communication between the scientists and researchers who build the theory and applicants who use it in fluid dynamics. The conference program will consist of presentations on subjects ranging from basic science reach to solid applications.

  • Short term course on Applied CFD and FEM
    Course, IIT(B.H.U), Varanasi, India, December 24, 2016

    This is one-of-its-kind industry oriented short term course that offers unique experience of both the field of FEM and CFD that covers broad range of topics on FEM and CFD. At the end of the course, the participants are expected learn the theory as well as quality meshing and analysis techniques of various types (1D, 2D, 3D in FEM, CFD problems).

January, 2017
  • fast Track Batch on CFD with OpenFOAM
    Course, Chinchwad, Pune, India, January 1, 2017

    This course is for you, if you are: New to OpenFOAM || You have partial training in OpenFOAM || Want to develop proficiency in CFD / OpenFOAM || Want to simplify the use of OpenFOAM || PG Student, Research Scholar, starting career in CFD || R&D person either in industry / lab etc

  • International Bhurban Conference on Applied Sciences and Technology (IBCAST)
    Conference, National Centre for Physics (NCP), Quaid-i-Azam University, Islamabad, Pakistan, January 10, 2017

    Starting from the year 2002, the IBCAST is being held consecutively for over a decade. Until the year 2005, four technological areas namely; Advanced Materials, Control Engineering, Computational Fluid Dynamics and Wireless Communication & Radar were covered. Later, four more research areas - Biomedical Sciences, Cyber Security, Medical Sciences and Underwater Technologies were included. In 2015, another research area Aerostructures was also included in the conference.

  • Flowing Matter 2017
    Conference, Faculty of Engineering, University of Porto, Porto, Portugal, January 23, 2017

    This conference will serve as an important event to get the three scientific communities involved in the COST Action MP1305 closer to each other: complex fluids (suspensions, granular materials, glasses, rheology), active matter (biological and synthetic micro-swimmers, bird flocks, insect swarms), and complex flows (turbulence, chaotic flows). The ultimate goal is to stimulate the interaction between these three scientific communities working on Flowing Matter.

  • Advanced Methods in Computational Fluid Dynamics
    Course, George Begg Building, School of MACE, University of Manchester, Manchester, United Kingdom, January 23, 2017

    This four (04) day course will address the analysis of modern approaches to turbulence modelling, different models and their applications to the solution of industrial problems including external and internal aerodynamics, heat transfer, combustion, aero-acoustics, Lattice Boltzmann Method, Smooth Particle Hydrodynamics (SPH), waves and tidal energy extraction modelling. The course also induces two (02) days of practical training on edf’s open source CFD solver Code_Saturne.

May, 2017
  • Engineering Simulation Expo
    Conference, DUKE ENERGY CONVENTION CENTER, CINCINNATI, United Kingdom, May 17, 2017

    The Engineering Simulation Expo 2017 is the trade show dedicated to the world of simulation technology, hardware and software. It brings world-leading products and services within the Simulation and Modeling field together with an audience of Simulation, FEA, Design, Stress, CFD and Structural engineers. Please click here to download our information brochure.

  • ERCOFTAC Workshop Direct and Large Eddy Simulation 11
    Workshop, Polo Didattico Piagge - Via Giacomo Matteotti, 11, Pisa, Italy, May 29, 2017

    The bi-annual Workshop series on Direct and Large Eddy Simulation (DLES) which started in 1994 focuses on modern techniques to simulate turbulent flows based on the partial or full resolution of the instantaneous turbulent flow structure. Techniques of hybrid modelling based on a combination of LES and RANS approaches also fall into this category and are covered as well.

June, 2017
  • Multiphase Flow 2017
    Conference, Tallinn, Estonia, June 20, 2017

    The 9th International Conference on Computational and Experimental Methods in Multiphase and Complex Flow will focus on the combination of experimental and computational techniques to gain a better understanding of all classes of multiphase and complex flow.

July, 2017
  • 1ST SUMMER SCHOOL ON COMPLEX FLUID-FLOWS IN MICROFLUIDICS - July 2017 @ Porto (Portugal)
    Course, Rua Dr. Roberto Frias s/n, Porto, Portugal, July 10, 2017

    This course intends to provide cutting-edge knowledge on complex fluid-flow at microscale, from experimental and numerical perspectives. It will be a 5-days course. The idea is providing a theoretical explanation during ~3h (morning session) and then a sort of hands-on workshop during the after lunch session, where some of the participants could expose one of the problems they are facing in their own institution in order to provide some feedback or possible solutions to them.

September, 2017
  • EUROGEN 2017
    Conference, School of Naval Engineering, Technical University of Madrid, Madrid, Spain, September 13, 2017

    12th ECCOMAS Thematic International Conference on Evolutionary and Deterministic Methods for Design Optimization and Control with Applications to Industrial and Societal Problems

[Back to Events Calendar Front Page]