[GAMBIT] URGENT! Error in generating volume mesh

wind.cfd · May 24, 2012, 19:44

Hello,
I have a problem in generating volume mesh from the surface mesh, when I want to create the volume mesh, I give the message regarding the skewness of the surface meshes. However I have a fine and good quality mesh on the surfaces.
I would really appreciated if someone help me.

Regards

-mAx- · May 25, 2012, 00:42

A good surface mesh doesn t automatically mean a good volume mesh,
Mesh your volume and check where are skewed elements with examine mesh
If volume mesh failed, check if you have some informations in the transcript window
once again, pictures are always welcomed

May 24, 2012, 19:44	URGENT! Error in generating volume mesh	#1
wind.cfd New Member cfd Join Date: Oct 2011 Posts: 17 Rep Power: 14	Hello, I have a problem in generating volume mesh from the surface mesh, when I want to create the volume mesh, I give the message regarding the skewness of the surface meshes. However I have a fine and good quality mesh on the surfaces. I would really appreciated if someone help me. Regards

May 25, 2012, 00:42		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	A good surface mesh doesn t automatically mean a good volume mesh, Mesh your volume and check where are skewed elements with examine mesh If volume mesh failed, check if you have some informations in the transcript window once again, pictures are always welcomed __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
[GAMBIT] Placing Specific Mesh Nodes in a Volume Mesh	davisi	ANSYS Meshing & Geometry	0	November 12, 2009 07:44
Interpolating volume data onto quad surface mesh	N.R.	CFX	6	June 7, 2007 08:15
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00