CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Boundary of the mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 19, 2012, 11:44
Default Boundary of the mesh
  #1
New Member
 
Huihui Wang
Join Date: Jul 2012
Location: Mississippi
Posts: 17
Rep Power: 5
huihui is on a distinguished road
I'm now confusing about the mesh size near the boundary.

7.19_3.jpg
7.19_4.jpg

First mesh is what I made in ICEM, it is a channel, second one is from a journal paper, it is a channel too. My problem is how can I make the mesh in the upside more large (I don't need the refinement in the upside boundary, like the second one). the grid should be larger along the depth, like layers.

THANKS!
HUIHUI
huihui is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
boundary conditions and mesh exporting vaina74 Open Source Meshers: Gmsh, Netgen, CGNS, ... 2 May 27, 2010 09:38
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 17:48.