CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[GAMBIT] Gambit help

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 12, 2013, 07:25
Default Gambit help
  #1
New Member
 
Alok Deshpande
Join Date: Oct 2010
Posts: 10
Rep Power: 6
alok.cd is on a distinguished road
Hi All,

I have a domain like below. Opposite edges have same mesh count.

https://picasaweb.google.com/1162266...25166580661154

Quad/Map or Quad/Submap should mesh the face like this, (I have made it out of 5 different faces just to show you.)

https://picasaweb.google.com/1162266...25169778632082

But when I mesh it as a single face, it becomes,

https://picasaweb.google.com/1162266...25170248959090

Any thoughts?

Thanks
alok.cd is offline   Reply With Quote

Old   February 12, 2013, 09:09
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,992
Rep Power: 30
-mAx- will become famous soon enough
Quote:
Originally Posted by alok.cd View Post
Quad/Map or Quad/Submap should mesh the face like this, (I have made it out of 5 different faces just to show you.)
https://picasaweb.google.com/1162266...25169778632082
Thanks
You didn't make the decomposition for us, but for you since it is the right way.
With surface decomposition, you always have more control on your mesh.
You just demonstrated it
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   February 12, 2013, 09:17
Default
  #3
New Member
 
Alok Deshpande
Join Date: Oct 2010
Posts: 10
Rep Power: 6
alok.cd is on a distinguished road
Quote:
Originally Posted by -mAx- View Post
You didn't make the decomposition for us, but for you since it is the right way.
With surface decomposition, you always have more control on your mesh.
You just demonstrated it
Thanks mAx, I should have saved it!
alok.cd is offline   Reply With Quote

Old   February 12, 2013, 12:24
Default
  #4
New Member
 
Alok Deshpande
Join Date: Oct 2010
Posts: 10
Rep Power: 6
alok.cd is on a distinguished road
hi mAx,

Now that I have 2 zones, what should be the boundary type for the edge that connects these two? Interface??

Thanks in advance!
alok.cd is offline   Reply With Quote

Old   February 13, 2013, 06:01
Default
  #5
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,992
Rep Power: 30
-mAx- will become famous soon enough
don't set anything on this edge. Thus if your split is well done, then both domains are connected, and Gambit will automatically set this edge as interior.
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   February 14, 2013, 04:15
Default
  #6
New Member
 
Alok Deshpande
Join Date: Oct 2010
Posts: 10
Rep Power: 6
alok.cd is on a distinguished road
Quote:
Originally Posted by -mAx- View Post
don't set anything on this edge. Thus if your split is well done, then both domains are connected, and Gambit will automatically set this edge as interior.
Worked. Thanks a lot..
alok.cd is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit help: Cube inside cube Jack Martinez FLUENT 13 August 11, 2010 06:29
Gambit 2.3.16, Xming or Exceed...HELP! bambam3417 FLUENT 10 May 7, 2010 12:39
Gambit -dev X11 doesn't work Ervin Amet FLUENT 0 October 28, 2007 09:33
between IDL Gambit and rhino, any help? philip FLUENT 0 June 23, 2005 12:08
Generating big meshes with GAMBIT on NT Andrew Ooi FLUENT 12 February 2, 2000 23:26


All times are GMT -4. The time now is 21:24.