|
[Sponsors] |
Inflation with Patch conformaing or patch independent |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
June 4, 2013, 10:56 |
Inflation with Patch conformaing or patch independent
|
#1 |
New Member
Sang Hyo Lee
Join Date: Mar 2012
Posts: 6
Rep Power: 14 |
Hi,
I made boudary mesh with Inflation method in Ansys workbench after performing Patch indepent, but sooner changed with patch conforming, because almost all of materials about inflation method shows the patch conforming. What is the difference between the inflation after doing patch conforming or doing patch independent method? I feel that the skewness with inflation after doing patch indepent is little bit lower than doing patch conforming. Could anybody tell me the difference clearly? thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ and u+ values with low-Re RANS turbulence models: utility + testcase | florian_krause | OpenFOAM | 114 | August 23, 2023 05:37 |
[GAMBIT] periodic faces not matching | Aadhavan | ANSYS Meshing & Geometry | 6 | August 31, 2013 11:25 |
CheckMeshbs errors | ivanyao | OpenFOAM Running, Solving & CFD | 2 | March 11, 2009 02:34 |
[Gmsh] Import gmsh msh to Foam | adorean | OpenFOAM Meshing & Mesh Conversion | 24 | April 27, 2005 08:19 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 05:12 |