|
[Sponsors] |
[ANSYS Meshing] ICEM to Fluent Build Grid Error |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 28, 2015, 11:49 |
ICEM to Fluent Build Grid Error
|
#1 |
New Member
Join Date: Nov 2014
Posts: 22
Rep Power: 11 |
I'm working on a tube in tube heat exchanger. I have created a geometry and mesh using ICEM but now when I try to read the mesh file in fluent I keep getting this error:
Error1.jpg Here are pictures of the mesh followed by the quality and highlighted elements. mesh.jpgqualityelements.jpg I am struggling to figure out what is causing this error? I have been told it could be to do with the low quality and should be refined to 0.5+ however I am even struggling to find ways to do this. I am relatively inexperienced however have completed all ansys tutorials and watched many youtube videos but still finding it very hard to find a way around this error. Help would be much appreciated! |
|
January 30, 2015, 10:46 |
|
#2 |
New Member
Join Date: Nov 2014
Posts: 22
Rep Power: 11 |
I have done a structured version of this now and have good quality everything seems fine but I still get this error when moving to fluent:
WARNING: Cell 0 of thread 10 is missing face 5. Cell Centroid is (0.501672, -4.540196, 4.905636). Clearing partially read grid. Error: Build Grid: Aborted due to critical error. Error: Build Grid: Aborted due to critical error. Error Object: #f Can't understand what im doing wrong... |
|
June 30, 2015, 01:54 |
|
#3 |
New Member
Join Date: Oct 2014
Posts: 1
Rep Power: 0 |
I've got the same problem. Please let me know if you manage to solve this problem.
|
|
June 30, 2015, 04:01 |
|
#4 | |
Member
Attique Javaid
Join Date: Apr 2015
Location: Pakistan
Posts: 66
Rep Power: 11 |
Quote:
regards, AJ |
||
July 1, 2015, 14:52 |
|
#5 |
New Member
Join Date: Nov 2014
Posts: 22
Rep Power: 11 |
If I remember correctly I think this error was occurring because I had a boundary condition incorrect double check them all, however I think this could be one reason from many for this error
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[OpenFOAM] Native ParaView Reader Bugs | tj22 | ParaView | 270 | January 4, 2016 11:39 |
The fluent stopped and errors with "Emergency: received SIGHUP signal" | yuyuxuan | FLUENT | 0 | December 3, 2013 22:56 |
Ansys Fluent 13.0 UDF compilation problem in Window XP (32 bit) | Yogini | Fluent UDF and Scheme Programming | 7 | October 3, 2012 07:24 |
Installation OF1.5-dev | ttdtud | OpenFOAM Installation | 46 | May 5, 2009 02:32 |
Problem with compile the setParabolicInlet | ivanyao | OpenFOAM Running, Solving & CFD | 6 | September 5, 2008 20:50 |