CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Inflation Issues

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 10, 2015, 16:46
Default Inflation Issues
  #1
New Member
 
Artur Castiel
Join Date: Jul 2015
Posts: 1
Rep Power: 0
thevilman is on a distinguished road
Send a message via ICQ to thevilman Send a message via Skype™ to thevilman
Hey guys, I've recently started studying CFD and Ansys in a master's degree class and I came across a problem. I was suppose to simulate the flow of water through a tubes and elbow. I've choosen a tetraheadrons path conforming methods and I've added inflation to the borders so I could check the boundary layer, after that I've done soem refining using sizing in the elbow itself. The whole problem is I've ended up with a small inflated layer in the area it was suppose to get bigger.

http://send-picture.com/img-55a02e7b3a69c.html

I've tried changing the transition ratio and redoing it. could someone help me?
thevilman is offline   Reply With Quote

Old   July 10, 2015, 22:56
Default
  #2
Senior Member
 
Join Date: Mar 2014
Posts: 170
Rep Power: 3
hwet is on a distinguished road
increase you curvature normal angle
hwet is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Inflation Layers Being Finicky Markua ANSYS Meshing & Geometry 12 April 28, 2015 07:11
Multigrid Stability Issues ThomasHermann SU2 1 November 5, 2014 17:18
Fluent diverges when using inflation layers ziggo FLUENT 4 August 9, 2013 12:11
[ANSYS Meshing] Inflation issues with Ansys CFX besmith1090 ANSYS Meshing & Geometry 0 May 29, 2012 15:46
Large Valve Flow Analysis - Inflation Problem sercan85 ANSYS Meshing & Geometry 2 June 1, 2010 14:02


All times are GMT -4. The time now is 23:51.