[Other] ANSYS to Fluent mesh export in ASCII format

Davitt · November 3, 2015, 17:15

Hello everyone,

I've recently read through this post as I am attempting to use fluent3DMeshToFoam to import a .msh file into OpenFOAM but after setting the the varaible for ASCII, the command still does not produce the mesh in OpenFOAM.
It just stops at Lexing...here is an image of the terminal
[IMG]

[/IMG]

Any help will be greatly appreciated,

Thank you,
Davitt

chewlupwai · April 21, 2016, 20:29

As mentioned in previous posts, changing environment doesn’t work in ANSYS v14 and above if you want to export .msh file as ASCII format. After a whole day of digging, I finally found the way, hope this helps:
Step 1: Tools -> Options -> Meshing -> Export
Step 2: Under ANSYS FLUENT, change Format of input files to “ASCII”
Step 3: Export as .msh format
Step 4: Run your fluent3DMeshToFoam to convert your mesh

cryabroad · July 12, 2018, 22:26

I know this is a very old post, just want to provide a little video I found. It's exactly what Lup Wai suggested, but you can see it in action.

https://www.youtube.com/watch?v=f9-GDWLKixg (Get .MSH Fluent Mesh File to Use in OpenFOAM w/o Having Fluent License)

At around 5' mark.

mattia_samiolo · May 17, 2021, 06:20

To export the .msh file in ASCII format the shortest way (from ANSYS meshing) is:

File -> Option -> Meshing -> Export -> Format of input file (.msh)

Choose ASCII and then you can easily extract the file in ASCII format exporting the mesh.

a.aralnu · October 19, 2021, 20:13

Yes, this is the way to do it from fluent mesh program.

If you are working in ICEM CFD v 2020R2 you have to go to output mesh menu --> select solver --> fluent, set BC --> input file. In the input file menu just click the Write Binary File : NO. This writes the mesh file in ASCII.

Just tried this after looking it up for a couple hours and it works.

November 3, 2015, 17:15		#61
Davitt New Member David Flemming Join Date: Oct 2015 Posts: 12 Rep Power: 10	Hello everyone, I've recently read through this post as I am attempting to use fluent3DMeshToFoam to import a .msh file into OpenFOAM but after setting the the varaible for ASCII, the command still does not produce the mesh in OpenFOAM. It just stops at Lexing...here is an image of the terminal [IMG][/IMG] Any help will be greatly appreciated, Thank you, Davitt

April 21, 2016, 20:29		#62
chewlupwai New Member Lup Wai Join Date: Sep 2014 Posts: 1 Rep Power: 0	As mentioned in previous posts, changing environment doesn’t work in ANSYS v14 and above if you want to export .msh file as ASCII format. After a whole day of digging, I finally found the way, hope this helps: Step 1: Tools -> Options -> Meshing -> Export Step 2: Under ANSYS FLUENT, change Format of input files to “ASCII” Step 3: Export as .msh format Step 4: Run your fluent3DMeshToFoam to convert your mesh Rodolfo Puraca likes this.

July 12, 2018, 22:26	Set it in ANSYS Meshing	#63
cryabroad Senior Member Ruiyan Chen Join Date: Jul 2016 Location: Hangzhou, China Posts: 162 Rep Power: 9	I know this is a very old post, just want to provide a little video I found. It's exactly what Lup Wai suggested, but you can see it in action. https://www.youtube.com/watch?v=f9-GDWLKixg (Get .MSH Fluent Mesh File to Use in OpenFOAM w/o Having Fluent License) At around 5' mark.

May 17, 2021, 06:20	Workbench 2020 r2	#64
mattia_samiolo New Member Mattia Samiolo Join Date: May 2021 Posts: 2 Rep Power: 0	To export the .msh file in ASCII format the shortest way (from ANSYS meshing) is: File -> Option -> Meshing -> Export -> Format of input file (.msh) Choose ASCII and then you can easily extract the file in ASCII format exporting the mesh.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
export ascii file with fluent	Clementine	FLUENT	3	August 2, 2012 09:52
Exporting structured mesh from ICEMCFD to Fluent?	jeevan kumar	FLUENT	1	January 23, 2012 11:21
how to export mesh file to Fluent	sachin	CFX	4	May 14, 2007 08:31
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
how to export mesh from ICEM CFD to Ansys	siv	CFX	10	March 23, 2006 08:19

October 19, 2021, 20:13		#65
a.aralnu New Member Arturo Alanís Join Date: Oct 2021 Posts: 9 Rep Power: 4	Yes, this is the way to do it from fluent mesh program. If you are working in ICEM CFD v 2020R2 you have to go to output mesh menu --> select solver --> fluent, set BC --> input file. In the input file menu just click the Write Binary File : NO. This writes the mesh file in ASCII. Just tried this after looking it up for a couple hours and it works.