CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

Creating volume for two surfaces in Ansys

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 22, 2010, 11:13
Exclamation Creating volume for two surfaces in Ansys
  #1
New Member
 
Martin
Join Date: Apr 2010
Posts: 10
Rep Power: 7
marbro is on a distinguished road
I have a problem with create volume for two surfaces in Ansys. I import to ansys .iges (fig. 1) but I would like to know how can I create one volume for beam and second for rest of figure which means I would like to create a figure with two volumes and next meshing them. iges ceate me only surface without volume and I must create it. I know how to creat for whole figure but I don't know how to do for two elements.

Thanks for any advice.

http://i292.photobucket.com/albums/m...2216-51-40.jpg

If you want to help me I put here example file wrote in .iegs format:

http://rapidshare.com/files/390368454/Part1.rar

Last edited by marbro; May 23, 2010 at 08:15.
marbro is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Importing or Creating 2D Flat Surfaces into CFX Sam CFX 5 March 30, 2013 12:11
Creating plots using Ansys CFX Marios CFX 4 April 17, 2008 23:24
Inclusive option (for creating volume) in CFX-Post KK CFX 0 February 4, 2008 20:25
creating volume from a surface file for CFD Amir Main CFD Forum 0 December 24, 2002 03:08
Creating vents(faces) in a cubical volume Julie FLUENT 6 June 6, 2002 11:27


All times are GMT -4. The time now is 20:49.