CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Forcing surface and curve to match

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 27, 2010, 01:28
Default [ICEM] Forcing surface and curve to match
  #1
Member
 
Sherif Kadry
Join Date: May 2009
Posts: 38
Rep Power: 16
sherifkadry is on a distinguished road
How do I force the Surface and a curve to match up. I am creating an axial turbine mesh. I create curves and from curves create surfaces however if you zoom in you'll see the curve used to create the surface and surface do not match and when you're creating a boundary layer area with a 0.01 mm spacing this error because an issue as you get skewed elements in this region. HOw do I ensure that the curve and surface are exactly the same. The problem for me is mainly at the shroud and blade surface points. The outermost blade curve and the surface of the shroud do not match exactly the error is larger than my inital BL spacing. Anyway to fix this? Any help would be appreciated!!!
sherifkadry is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Hexa mesh, curve mesh setup, bunching law Anorky ANSYS Meshing & Geometry 4 November 12, 2014 01:27
mapping flat surface to curve surface wei Siemens 2 June 26, 2009 09:10
curve surface problem sianG CFX 0 February 8, 2009 09:52
Normal - Helical Surface m. malik Main CFD Forum 3 February 3, 2006 13:56
CFX4.3 -build analysis form Chie Min CFX 5 July 13, 2001 00:19


All times are GMT -4. The time now is 07:16.