CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] Axisymmetric Thin Surface

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 22, 2010, 15:19
Default Axisymmetric Thin Surface
  #1
New Member
 
Join Date: Sep 2010
Posts: 3
Rep Power: 6
ColinS is on a distinguished road
I'm trying to create a simulation in CFX of a 2D axisymmetric, zero thickness surface in an external flow and I'm having difficulty going about meshing in ICEM. The geometry is similar to a hollow hemisphere which is defined by one curve (that is rotated 360 degrees). Any advice or pointers on how to mesh this curve? Do I need to revolve the curve a small angle to make it 2.5D or can I do this in the X-Y plane and output the mesh as a FLUENT file to be interpreted by CFX? I can't seem to find any similar tutorials or examples on the forums.
ColinS is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with Gmsh nishant_hull Open Source Meshers: Gmsh, Netgen, CGNS, ... 18 April 22, 2015 08:43
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 June 29, 2009 00:48
Thin Surface Manu CFX 0 November 29, 2006 17:13
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19
free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin Kaushik FLUENT 1 May 8, 2000 06:47


All times are GMT -4. The time now is 21:55.