CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[GAMBIT] Problem in importing in fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 23, 2011, 14:09
Default Problem in importing in fluent
  #1
Member
 
Vaibhav Rai Khare
Join Date: Jul 2011
Location: Jaipur
Posts: 37
Rep Power: 6
vaibhavraikhare is on a distinguished road
i have made a design jus lyk an closed box...now have a prob that there is 1 plate inside the box and during importing fluent doesnt read that plate bcoz of 2D and 3D...
is there any way to change the plate in 3D design means my whole model is in green color that represent volume..but the plate color is ligt blue..that means its onlt a surface..hw could i change it into green color..
vaibhavraikhare is offline   Reply With Quote

Old   November 24, 2011, 04:09
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,990
Rep Power: 30
-mAx- will become famous soon enough
you can create your volume by sweeping your blue surface.
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   November 24, 2011, 05:35
Default
  #3
Member
 
Vaibhav Rai Khare
Join Date: Jul 2011
Location: Jaipur
Posts: 37
Rep Power: 6
vaibhavraikhare is on a distinguished road
sorry max..didnt get ur point..the blue surface will not convert into volume bcoz its nt d close 1...its an open plate like a passage in the box.
vaibhavraikhare is offline   Reply With Quote

Old   November 24, 2011, 13:43
Default
  #4
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,990
Rep Power: 30
-mAx- will become famous soon enough
yes but if you want your surface to have a depth (volume), then you need to sweep your face
http://my.fit.edu/itresources/manual...mg0205.htm#406

If you want to stay with your thin plate, then consider it as baffle. (just enforce gambit to define it as wall)
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
problem importing mesh into gambit tsm554 FLUENT 7 December 3, 2010 23:15
MPI problem with fluent aryanet FLUENT 8 October 24, 2010 15:13
Problem about Fluent on Linux hbinma FLUENT 3 July 6, 2008 10:49
A problem about Importing mesh from fluent aderliner OpenFOAM Running, Solving & CFD 0 December 19, 2006 00:00
Problem using parallel Fluent Gustavo FLUENT 0 June 27, 2004 23:12


All times are GMT -4. The time now is 16:57.