CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Unable to generate surface mesh for a coil

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 2, 2011, 11:51
Default Unable to generate surface mesh for a coil
  #1
New Member
 
Piti
Join Date: Mar 2009
Posts: 7
Rep Power: 7
pitisrisuk is on a distinguished road
Hi,

I'm using Workbench 11 and trying to mesh a coil with CFX-Mesh. When I click on Generate Surface Mesh, I receive an error message:

Internal Error
Unable to locate containing element for node
Coordinate: 0.0000E+00, 1.5661E+02, 1.3248E+01
Coordinate: 3.3536E+00, 0.0000E+00

If I make a constant edge length smaller or try to refine spacings, it says:

Internal Error
MEM_EXTD storage allocation failed

I'm not sure what these two messages mean. Can anyone explain to me what these mean and how to resolve this issue? I think my geometry is ok.

Thanks,
Piti
pitisrisuk is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM kawamatt2 ANSYS Meshing & Geometry 17 December 20, 2011 11:45
[ICEM] Problem making structured mesh on a surface froztbear ANSYS Meshing & Geometry 4 November 10, 2011 08:52
[ICEM] Problem making structural mesh on a surface froztbear ANSYS Meshing & Geometry 1 November 10, 2011 08:52
Error : Self intersecting surface mesh, computing intersections & Error : Impossible velan Open Source Meshers: Gmsh, Netgen, CGNS, ... 0 June 29, 2009 00:48
How to generate the mesh on the surface in prostar raymond CD-adapco 1 September 13, 2001 05:48


All times are GMT -4. The time now is 12:04.