|February 22, 2012, 06:17||
Mixing structured with unstructed mesh
Join Date: Nov 2011
Posts: 33Rep Power: 6
I trying to mesh a surface boat with the bottom structured and the rest unstructured.
Check this post:
blocking 2D planar, problem associate edge to curve
I want to do the same mesh than the picture but with the boat, mixing structured with unstructured. I use in volume mesh the octree method and existing mesh part (for including the structured mesh)
I put the tin and the blk in dropbox.
I am not capable to mesh it ! I do it for the appendices (picture) but for the boat , this is not working, perhaps about the topology or faceted surfaces of the boat.
If you have a solution or advice.
Thank you in advance
|Thread||Thread Starter||Forum||Replies||Last Post|
|SnappyHexMesh for internal Flow||vishwa||OpenFOAM Native Meshers: snappyHexMesh and Others||23||August 6, 2014 03:50|
|[ICEM] Generating Mesh for STL Car in Windtunnel Simulation||tommymoose||ANSYS Meshing & Geometry||48||April 15, 2013 04:24|
|2D Mesh Generation Tutorial for GMSH||aeroslacker||Open Source Meshers: Gmsh, Netgen, CGNS, ...||12||January 19, 2012 04:52|
|[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM||kawamatt2||ANSYS Meshing & Geometry||17||December 20, 2011 12:45|
|Structured Grid Definition||craig shores||Main CFD Forum||3||March 21, 2001 15:48|