CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Error Tutorial 7 ?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 19, 2000, 14:27
Default Error Tutorial 7 ?
  #1
Mathew
Guest
 
Posts: n/a
Hello,

I have been attempting to complete tutorials 7-1 and 7-2 (of ProStar) however on executing the pmovlink I get an error informing me that 'max cells exceeds 1'.

For the problem, all values for prosize (hence prolinkl which I have to use) are given, and the max number of cells is 120,000 anyway. The error does not specify which cells it refers to, however all relevent values for cell numbers are in excess of the required amount anyway.

If anyone else has had the same problem or is aware of the reason for the error, I would be must obliged if you could reply.

Thanks in advance.

Mathew
  Reply With Quote

Old   July 20, 2000, 05:39
Default Re: Error Tutorial 7 ?
  #2
J. Y. Luo
Guest
 
Posts: n/a
Dear Mathew,

This looks very strange - this tutorial has been tested over 30 operating systems and over a few STAR versions. When you execute pmovlink, it is trying to check if the maximum PROSTAR cell number matches the one in the geometry file. The maximum PROSTAR cell no. is written in parm.inc with parameter NCPSMX. Please check your PROSTAR run again - could it be that parm.inc is not created for this case (you can do the following in prostar:

resume

trfi connect

evfi connect

geom

  Reply With Quote

Old   July 20, 2000, 19:35
Default Re: Error Tutorial 7 ?
  #3
Sreenadh
Guest
 
Posts: n/a
Sounds like you did not have the events turned on before writing the geometry file. Redo with the following commands in sequence

time,trans mvgr,on,events evfile conn geom

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Error in Tutorial 21 Vidiii CFX 4 May 2, 2009 14:18
Error in bc.c for VOF tutorial? hungpavn FLUENT 1 December 30, 2006 14:07
Error occuring in pro-am first tutorial aero CD-adapco 2 December 21, 2006 09:58
CEL error in tutorial #20 Anurag CFX 1 January 21, 2005 17:23
tutorial error? K.L.Huang CD-adapco 5 May 1, 2000 13:20


All times are GMT -4. The time now is 06:44.