CFD Online Logo CFD Online URL
Home > Forums > CD-adapco

About block creation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 20, 2001, 07:09
Default About block creation
Stefano Bertoldo
Posts: n/a
Hi I've imported a 3D drawing from a CAD package as an IGES file; the first question is: it is better import as splines or surfaces to generate the block of the geometry? And then when I try to make a block, I define the splines for the most complex surfaces then I give the 8 points but always an edge of the block fails. Why? Could anybody help me? Thanks.
  Reply With Quote

Old   March 27, 2001, 19:16
Default Re: About block creation
Posts: n/a
I finally got BLOCKs to work, but only after noting that the splines couldn't predate the block. Importing splines would appear to be futile: it's better to import STL's; they have vertices in space where you need them for the corners that define the block, then vertices at the edges between corners for forming the splines that will shape the block.

Tom Maher GM Powertrain
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Block Tridiagonal and Block Bidiagonal solver Amit Main CFD Forum 8 February 18, 2015 17:53
problems with viewing mesh block by block James CFX 0 January 22, 2008 13:11
Multiblock: one block to many block interface kpv CFX 0 December 9, 2007 20:53
Block-Block tridiagonal matrix inverse Abdulhafid Elfaghi Main CFD Forum 3 September 16, 2007 02:55
looking for 2D block/multi-block grid generator phsieh Main CFD Forum 0 October 29, 2003 09:07

All times are GMT -4. The time now is 01:14.