CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

using outlet conditions as inlets for other model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 28, 2002, 18:38
Default using outlet conditions as inlets for other model
  #1
George
Guest
 
Posts: n/a
I'm looking to export a solution at the outlet of a model, take those same conditions and import them into another model as inlet conditions (in order to model segments of a large HVAC system at a time while preserving conditions throughout the model).

Can this be done? If so, how?

Thanks.

GN
  Reply With Quote

Old   February 1, 2002, 06:27
Default Re: using outlet conditions as inlets for other mo
  #2
Anton S. Lyaskin
Guest
 
Posts: n/a
Hi!

The general strategy is:

1. Define the coordinate system in some specific point of your outlet (i.e., corner or center) 2. Select the vertices at the outlet and load their coordinates in your new c.s. and all the necessary post data to graph registers (Graph->Load Graph Data...) 3. Write the registers to a file. 4. Now you have to do some manual editing to convert your .grf file to a table. You better look at the manual for the information about tables and their formats. 5. In your "next" model define the c.s. at the inlet at the same point and with the same orientation as at the outlet. Than you have to specify its number in the table. 6. Select option "Table" for your inlet and choose the table file you've created. Don't forget to check the table by reading it and trying to plot the values.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Outlet conditions in BuoyantFoam jont OpenFOAM Running, Solving & CFD 2 October 15, 2007 07:55
Outlet Boundary Conditions benbru CD-adapco 2 October 2, 2007 07:46
Re: Pressure Outlet Conditions Andrew FLUENT 1 December 20, 2006 14:36
Boundary conditions at outlet bajjal FLUENT 0 July 13, 2006 08:16
outlet conditions tzapelina Phoenics 3 January 16, 2004 05:07


All times are GMT -4. The time now is 01:13.