CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

defining boundary regions

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 15, 2004, 11:54
Default defining boundary regions
  #1
Steve
Guest
 
Posts: n/a
I have a problem with defining boundary regions in STAR CD. Everytime I add an inlet to my model and check the model setup afterwards the error warning tells me "boundaries not found on the exterior of the model". What am I doing wrong?
  Reply With Quote

Old   January 16, 2004, 08:35
Default Re: defining boundary regions
  #2
Michiel
Guest
 
Posts: n/a
You probably added your boundary in an interface between two cells. This is likely to happen if you select you cells from a vset or add you boundary to a subset of your complete domain.

You could try: bset all vset news bset

and plot all the vertices and see if one couple is somewhere inside your domain.

Michiel
  Reply With Quote

Old   January 22, 2004, 11:31
Default Re: defining boundary regions
  #3
ale
Guest
 
Posts: n/a
hy, you could make as follow: boundary tools boundary check bdel bset After that you could check again the boundary. By
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Defining Boundary Conditions in GAMBIT Tim R FLUENT 3 April 14, 2008 04:30
Defining Regions in ICEM Tom CFX 10 April 25, 2007 00:31
Defining wall boundary region saleem CD-adapco 3 August 31, 2005 03:58
help in defining boundary condition rama krishna FLUENT 2 July 25, 2005 04:59
defining regions Harriet Pearson Main CFD Forum 0 February 19, 2004 13:44


All times are GMT -4. The time now is 22:01.