CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Writing ngeom file

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 29, 2004, 12:28
Default Writing ngeom file
  #1
Luca D
Guest
 
Posts: n/a
Hello all,

As a new user, I have been asked to write an *.ngeom file of a model of nearly 6,000,000 cells so that the model can be imported by Comet.

The problem is that I get a error messages saying that there are problem with some couples and then finally that the output file is not correct and therefore cannot be written.

Has anyone had the same problem? What are some work around solutions, if any?

Thanks in advance
  Reply With Quote

Old   March 29, 2004, 16:10
Default Re: Writing ngeom file
  #2
steve
Guest
 
Posts: n/a
There are a couple of options: 1)Investigate the couple errors. If they are really wrong, fix them. 2)Look at the quality of the cells around the couples. If they are badly warped, that could be causing the problem. 3)If there are only a few couples in question, you could try deleting them. It will lead to small "cracks" in the continuity of your model, but if a handful cells out of 6e6 are not connected properly, you might not really have a problem. At least you could start on a solution. 4)If possible, find a 64bit machine, just to be sure that you are not having any memory problems.
  Reply With Quote

Old   March 30, 2004, 05:24
Default Re: Writing ngeom file
  #3
Luca D
Guest
 
Posts: n/a
Thank-you steve for your time and effort, I will try those suggested solutions.

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF for writing txt. file manu FLUENT 2 December 13, 2007 07:19
problem with .ngeom file raffap CD-adapco 0 March 6, 2007 12:19
writing data to file using UDF sawa FLUENT 0 November 8, 2005 06:51
Writing to a file Mike FLUENT 6 June 18, 2005 23:57
writing User file sam CD-adapco 1 May 31, 2005 15:10


All times are GMT -4. The time now is 02:11.