CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Comet - air velocity

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 26, 2004, 15:13
Default Comet - air velocity
  #1
Tony Campbell
Guest
 
Posts: n/a
Hi folks, Using the post-processing command (plfi vel), in a air water interface problem, i see both the velocity vectors for air and that of water. i guess because the air is lighter, air speed is higher and the vectors have a huge compared to that of water (this is the required vel). i was wondering if there is a way of getting rid of the air velocity at the air-water interface. any help would be greatly appreciated.

probably there should be a way of using the concentration parameter, but i cant figure out how!

thanks for your continued help!
  Reply With Quote

Old   November 3, 2004, 14:00
Default Re: Comet - air velocity - have same problem
  #2
emmanuel
Guest
 
Posts: n/a
i have the same problem..anybody with any ideas??
  Reply With Quote

Old   November 7, 2004, 06:57
Default Re: Comet - air velocity
  #3
4xF
Guest
 
Posts: n/a
I guess that you have a huge smearing of the volume-fraction over there or that you have not converged correctly within every time step, which would explain why you'd have such big differences in the velocities. Anyway... If you want to get rid off the air velocity for the display and if SP1 is the volume-fraction of water in air (i.e. Sp1=1 => 100% water), here is the Cometpp macro you need (please feel free to improve...) For the command details, RTFM

%% load velocities into register 1 to 3 stlo 1 u & stlo 3 v & stlo 3 w %% load species 1 into stack 4 stlo 4 Sp1 %% multiply velocity with Sp1 => water only stma mult 1 4 1 stma mult 2 4 2 stma mult 3 4 3 %%% display popo all new vect popo all add edge deco coun on 'Vel. [m/s]' plex

Have fun...

  Reply With Quote

Old   November 10, 2004, 02:37
Default Re: Comet - air velocity
  #4
emmanuel
Guest
 
Posts: n/a
superb! it works. thanks.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Comet FSI Erik CD-adapco 0 July 19, 2005 16:23
comet? Thomas CD-adapco 2 November 15, 2004 03:30
Comet Harichander CD-adapco 3 May 5, 2003 01:14
COMET??? Dougal Main CFD Forum 1 April 6, 2003 19:49
[about COMET] CFDer CD-adapco 1 March 28, 2003 06:02


All times are GMT -4. The time now is 03:11.