CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Hi ...Problem in STAR CD

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 6, 2005, 15:18
Default Hi ...Problem in STAR CD
  #1
Sandeep
Guest
 
Posts: n/a
Hi all,

I created a 3-D model of a room in STAR CD. The flow is transient, the inlet being a diffuser on the top (oulet is also on the same side).The problem that I am facing is: 1. I need to setup a condition "If the temperature is below x degrees, the thermostat has to kickon meaning velocity of air thru inlet has to be activated( and ofcourse decativated if it goes below y degrees). Plz help me with this. Its due on my thesis. Thanks a ton. All help would be greatly be appreciated.

Sandeep
  Reply With Quote

Old   July 6, 2005, 15:57
Default Re: Hi ...Problem in STAR CD
  #2
Ben
Guest
 
Posts: n/a
You need a nice if condition in your bcdefi subroutine, you may need to use a posdat to get a cell temperature relating to your thermostatic point but it shouldnt be that hard.
  Reply With Quote

Old   July 7, 2005, 01:23
Default Hi ...Problem in Event executing
  #3
Mac
Guest
 
Posts: n/a
Hello:

Am having a problem executing the moving mesh. The Fortran 8.0 compiler used to execute the events crashes. It opens a window to start executing the solution, but suddenly comes out and fails. Can you please suggest a solution for this ?

Have tried installing the same again, but in vain. Please advise.

Thanks..
  Reply With Quote

Old   July 7, 2005, 01:23
Default Hi ...Problem in Event executing
  #4
Mac
Guest
 
Posts: n/a
Hello:

Am having a problem executing the moving mesh. The Fortran 8.0 compiler used to execute the events crashes. It opens a window to start executing the solution, but suddenly comes out and fails. Can you please suggest a solution for this ?

Have tried installing the same again, but in vain. Please advise.

Thanks..
  Reply With Quote

Old   July 7, 2005, 04:28
Default Re: Hi ...Problem in Event executing
  #5
Ben
Guest
 
Posts: n/a
whats this got to do with thermostats and boundary conditions?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A problem about STAR-CCM+ TSAI CD-adapco 3 March 13, 2009 21:01
the problem of running star-cd after pro-star liu-jinsong CD-adapco 0 November 20, 2008 21:58
Please help with star run problem usker CD-adapco 3 July 11, 2007 03:48
some problem in star-cd kathir CD-adapco 0 January 20, 2006 04:44


All times are GMT -4. The time now is 01:18.