CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Specified angle flow rate measurement in a pipe.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 17, 2006, 21:49
Default Specified angle flow rate measurement in a pipe.
  #1
Sarala
Guest
 
Posts: n/a
In a 360 degree cylinder pipe I divide the cross section into 72 pieces,namely,each angle is 5 degree.In the experiment ,I measure the veloctiy profile of the straight path from 10 degree to 190 degree compared with that from 0 degree to 180 degree in a cylinder pipe. My question is how to measure the velocity profile at the specified θ angle in the pipe.(ps:not the flow rate across all the cross section but the specified θ angel.) Thank you sincerely.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Angle measurement in CFX sham CFX 0 September 2, 2006 00:26
Defining Massflow rate at an angle vis CFX 1 March 21, 2006 07:47
Flow measurement around intake valve pressure condition problem fedegavo OpenFOAM Running, Solving & CFD 1 January 20, 2006 14:06
Specific mass flow rate in a pipe-like subdomain James CFX 0 July 28, 2003 17:30
Flow field measurement in turbomachinery! Wanlai Lin Main CFD Forum 3 September 3, 1999 12:06


All times are GMT -4. The time now is 19:57.