CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Cannot synchronize nodes while saving in parallel

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 12, 2007, 03:01
Default Cannot synchronize nodes while saving in parallel
  #1
Josh
Guest
 
Posts: n/a
When running in parallel I got an error message stating that starccm could not synchronize nodes. The machine I am running on is running Suse linux with 4 AMD opteron 64 bit processors with shared memory. I have ran smaller files in parallel in the past and had no problems. The larger file which I got that error message with saves fine sometimes and gives the error message at other times. Since all the procssors are on the same board I would not think it should have any problems synchronizing.

I ran the same file on a dual processor red hat linux work station with no problems. This workstation was running two xeon 64 bit processors.

I plan on upgrading to the latest version of the software, but has anyone seen this problem before?
  Reply With Quote

Old   January 12, 2007, 05:36
Default Re: Cannot synchronize nodes while saving in paral
  #2
steve
Guest
 
Posts: n/a
Hi,

I am guessing the problem is occuring with STAR-CCM+ What version do you use?

  Reply With Quote

Old   January 12, 2007, 12:02
Default Re: Cannot synchronize nodes while saving in paral
  #3
Josh
Guest
 
Posts: n/a
We are currently using 2.04.004, I'm having 2.04.008 installed, but I do not have admin access, so I have to wait for it to be updated.
  Reply With Quote

Old   January 14, 2007, 21:52
Default Re: Cannot synchronize nodes while saving in paral
  #4
Chris
Guest
 
Posts: n/a
That is fixed in 2.04.010

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Parallel fluent 4 nodes machine (Quad 6600 SUSE) Rafa FLUENT 4 June 7, 2011 06:33
Cant run in parallel on two nodes using OpenMPI CHristofer Main CFD Forum 0 October 26, 2007 09:54
Minimum number of nodes to run CFX in parallel Rui CFX 3 April 11, 2005 20:46
Saving Alexandre CD-adapco 1 December 17, 2001 04:12
Nodes positions + velocity and pressure values at the nodes Lily Kabanj FLUENT 1 March 13, 2000 20:21


All times are GMT -4. The time now is 13:05.