CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Is the Residual acceptable?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 2, 2007, 10:02
Default Is the Residual acceptable?
  #1
Boon Ping , Oh
Guest
 
Posts: n/a
I'm currently doing two simulations. One of the Residual diverges in the beginning for around 100 iterations. Though it converges eventually till 0.001. Is it fine and acceptable? Another one diverges abit in the beginning and have zick zacks when the residual stays 0.001. I've checked the Cell Quality, whether I#m using the right Condition, checked the Wall Y+ and it's all fine. Are both the Simulations not acceptable? Are those Simulations, which Residuals have zick zacks of diverge few times but eventually converge acceptable?
  Reply With Quote

Old   February 2, 2007, 10:48
Default additional question: Is the Residual acceptable?
  #2
Boon Ping , Oh
Guest
 
Posts: n/a
Is it alright for the residual diverges few times before it converges to 0.01?
  Reply With Quote

Old   February 2, 2007, 11:17
Default Re: additional question: Is the Residual acceptabl
  #3
sidd
Guest
 
Posts: n/a
Ping,

For the fluctuation part, you should notice the level of deviation of you residual. There may be local fluctuations, but if the overall trend is decreasing then you can rely on it. These fluctuations give an indication of how stable your simulation has become. And these fluctuations come mostly due to some local-domain parameters' imbalancing. If your area of intereset is to focus on global values, then its better that you rely on these values.

Most practical method is to look into your result and check for unrealistic values of solving parameters in your calculation domain, if it is there.

Regards,
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Is such Residual acceptable? Boon Ping , Oh Main CFD Forum 8 February 5, 2007 04:54
Convergence on Local Time Scale Acceptable Turbine CFX 7 August 14, 2006 08:13
Acceptable Pressure Gradients Jason FLUENT 0 February 18, 2005 10:09
Acceptable Gradient Values Raman Chadha FLUENT 0 January 12, 2005 19:00
Acceptable Accuracy or Error? Erich Main CFD Forum 6 July 2, 2001 13:30


All times are GMT -4. The time now is 08:31.