CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Help with Turbulence Divergence in CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   April 26, 2007, 16:14
Default Help with Turbulence Divergence in CCM+
  #1
Dan
Guest
 
Posts: n/a
Hi all,

I'm running a ship simulation, which requires several thousand iterations to develop the wave pattern and converge the drag forces. My model seems to run fine for the first 5000 or so iterations, after which the turbulence models begin to blow up. The residuals go quite high, but the model doesn't diverge (yet!) any ideas what could be happening?

It is a time accurate simulation, VOF solver, k-eps turb, and incompressible.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
solution divergence due to turbulence Haider FLUENT 1 October 18, 2006 07:27
Help: divergence Mansi FLUENT 3 December 31, 2005 06:39
Divergence Docker FLUENT 7 April 17, 2005 19:02
About divergence! xhliu1 CD-adapco 0 March 27, 2005 23:37
what can cause divergence? Jeffery FLUENT 5 September 16, 2004 12:54


All times are GMT -4. The time now is 22:30.