CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Max Scratch Space

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 17, 2007, 00:48
Default Max Scratch Space
  #1
Ravi
Guest
 
Posts: n/a
Respected Sir i have the problem of Max scratch space while creating the mesh as per geometry, as the number of vertices increases then this problem occures memory cannot be allocated for MSCR2 above the limit set in Star-CD. How to change or increase that max limit of scratch space?
  Reply With Quote

Old   May 17, 2007, 14:21
Default Re: Max Scratch Space
  #2
TG
Guest
 
Posts: n/a
Your best bet is to run prosize before running prostar and tell it how big you need different numbers. Make everything a little bigger than what you think you need. You can also resize on the fly using the MEMORY command but you can't do that too many times before running out of virtual memory. If you are running on a 32bit machine and you need more memory than it can accomodate, you are out of luck.
  Reply With Quote

Old   May 18, 2007, 01:54
Default Pressure Boundary
  #3
Ravi
Guest
 
Posts: n/a
Respected Sir Problem discription: i have to simulate a haloow U- tube , both ends are provided with Pressure boundary by user subroutine, the pressure at one end is "high" while at other end it is "low", the situation get reverse after some time step. this is mean that the flow get reverse (Oscillating type)at every time?

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Scratch Space Error during combustion simulation Emmanuel Kasseris CD-adapco 10 October 25, 2008 17:12
Scratch Space? B Bru CD-adapco 2 September 17, 2007 11:31
How to compile OpenFOAM from scratch bashrc and cshrc danieltourde OpenFOAM Installation 2 December 15, 2006 10:30
RAM and Swap Space and HD space Anindya CD-adapco 1 March 9, 2001 04:07
HD Space for LES ANINDYA Main CFD Forum 4 February 16, 2001 12:56


All times are GMT -4. The time now is 20:37.