CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

what is zero face area failure??

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 27, 2007, 02:23
Default what is zero face area failure??
  #1
DON
Guest
 
Posts: n/a
hi, could anybody explain what is zero face area failure in proam?why do we get this failure and how to rectify this problem??

thanks..
  Reply With Quote

Old   May 31, 2007, 04:40
Default Re: what is zero face area failure??
  #2
DON
Guest
 
Posts: n/a
can anybody help???

  Reply With Quote

Old   May 31, 2007, 06:51
Default Re: what is zero face area failure??
  #3
xdm
Guest
 
Posts: n/a
NO!
  Reply With Quote

Old   May 31, 2007, 15:07
Default Re: what is zero face area failure??
  #4
Ben
Guest
 
Posts: n/a
remesh time....
  Reply With Quote

Old   May 31, 2007, 16:14
Default Re: what is zero face area failure??
  #5
paulh
Guest
 
Posts: n/a
Who knows why this happens " or better yet why it is allowed to happen. However, you have a couple of options.

Check to see that there is nothing in the surface and/or subsurface in the area of your bad cells that would cause a problem " spikes, overlaps, etc. " if there is, fix it. You can then remesh as usual.

Manual cell fixing " delete the bad cells, surrounding cells if needed, and click in some new cells by hand. Or you can just delete the bad cell and run the model with a cubic like obstruction. Make sure to check that the remaining CpMatches are valid.

There is no silver bullet.

  Reply With Quote

Old   June 1, 2007, 02:09
Default Re: what is zero face area failure??
  #6
DON
Guest
 
Posts: n/a
thanks Paulh , let me try...
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Area of a particular face of the cell using UDF krish Fluent UDF and Scheme Programming 2 March 12, 2013 06:37
Face Area Corentin FLUENT 2 April 9, 2008 12:33
how to get cell face area in RADPRO.F cthsieh CD-adapco 1 January 2, 2007 09:53
Face area gg FLUENT 0 June 30, 2003 05:18
face area John FLUENT 1 August 13, 2002 05:12


All times are GMT -4. The time now is 10:27.