|
[Sponsors] |
September 20, 2007, 12:28 |
calculation with increased pressure
|
#1 |
Guest
Posts: n/a
|
Dear all,
I am working on a chemical conversion problem with temperature and absolute pressure dependent chemistry, implemented in mainly posdat and some other routines. The code is working fine on ambient pressure. Now I tried to calculate on a higher absolute pressure level. I increased the pressure in the monitoring and reference data and in the liquid and gases initialization with "code initialization - include pressure". The results are not as I suspected, has anyone any idea if I forgot any changes or if I probably do need any switch? Thanks for your help, nicola |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Calculation of Pressure Loss | jason | OpenFOAM Running, Solving & CFD | 57 | September 8, 2018 22:51 |
temperature increased does not match the heat flux | GUOQIANGWOO | FLUENT | 2 | April 6, 2010 01:29 |
Restarting KIVA with increased timestep | Tomislav | Main CFD Forum | 0 | March 14, 2006 07:39 |
Restartung KIVA with increased dt | Tomislav | Main CFD Forum | 0 | February 13, 2006 06:41 |