CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Passive scalar initial condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 12, 2008, 12:47
Default Passive scalar initial condition
  #1
Adam
Guest
 
Posts: n/a
I am trying to model Taylor-Aris dispersion in a pipe. The flow field is steady-state. I need to partition the initial concentration along the axis of the pipe so that there is a thin "disc" with uniform, dilute concentration somewhere in the pipe and zero outside that region. In more precise terms, I need to define a square wave along the z-coordinate while maintaining symmetry along r and theta. Has anyone done this?... or have an idea of how to start? It seems like it should be relatively simple but I've been working at it for a while
  Reply With Quote

Old   May 13, 2008, 17:23
Default Re: Passive scalar initial condition
  #2
Adam
Guest
 
Posts: n/a
In case anyone is curious the trick is to define different cell types of the same material, then write a user subroutine to select a certain type and change the concentration.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Passive scalar transport novyno OpenFOAM Running, Solving & CFD 9 September 6, 2012 06:52
Passive Scalar Andy R FLUENT 0 January 10, 2007 15:49
passive scalar boundaries ultrich CD-adapco 0 July 12, 2005 11:20
starwatch & passive scalar isidro CD-adapco 1 June 24, 2005 23:59
Mixing of a passive scalar Maged Ismail FLUENT 0 June 10, 2005 09:09


All times are GMT -4. The time now is 17:56.