CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Model with L turn

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 4, 2008, 20:33
Default Model with L turn
  #1
c0384
Guest
 
Posts: n/a
Hi

I am modelling a rotating blade by using k-epsilon model with SFCD discretization scheme. There is a L turn flow path before the fluid enter the rotating blade. CFD results show that fluid loss all its energy before entering the rotating blade, and this is identified as the reason of why the torque on blade is a lot smaller than experimet value. L turn seems to give a big error to my simulation. I tried to change the discretization scheme to MARS and I get a little of improvement for my torque but still small if compared to experiment value.I suspect this unbelievable results might be due to improper use of CFD model. Can any advise me on what is the appropriate CFD model for my simulation, or any ways I can improve my CFD results?

Thanks in advance.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I turn an element "off" in CFX? Joshua CFX 5 May 26, 2008 12:00
HOW TO TURN $6 INTO $6,000!!!!!! Dalibor FLUENT 1 October 26, 2006 19:41
turn off k-epsilon model Malcolm CFX 2 June 30, 2005 12:29
v2f model turn on?? Rain FLUENT 6 February 17, 2005 07:58
turn on turbulence equations Sergei CFX 2 June 11, 2003 01:05


All times are GMT -4. The time now is 00:07.