CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CD-adapco

Validation of Star CCM+

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 25, 2010, 01:58
Default Validation of Star CCM+
  #1
New Member
 
Ian
Join Date: Nov 2010
Posts: 1
Rep Power: 0
iand is on a distinguished road
Hi Guys

We have carried out a fire model for a two storey open plan building using Star CCM+. Unfortunately the 3rd party reviewer claims never to have heard of Star CCM+ and needs proof of validation for the use of this software. Unfortunately we cannot get rid of the 3rd party reviewer.

We have unsuccessfuly tried to get this information from Cd-adapco in the UK. Anyone have any ideas where we can get some form of proof of Star CCM+'s validaty for use with a fire/smoke buoyancy model or even just a validation document reference for Star CCM+?

Any suggestions gratefully received
iand is offline   Reply With Quote

Old   November 25, 2010, 05:50
Default
  #2
New Member
 
Stephen Ferguson (CD-adapco)
Join Date: Nov 2010
Posts: 1
Rep Power: 0
Stephen Ferguson is on a distinguished road
Ian,

We have extensive validation data for fire and smoke modeling. PM me with your email address and I'll put you in touch with our expert.

Stephen (CD-adapco)
Stephen Ferguson is offline   Reply With Quote

Old   December 8, 2010, 07:59
Default
  #3
Senior Member
 
Join Date: Mar 2009
Posts: 203
Rep Power: 9
Maddin is on a distinguished road
Ui... Adapco Support is present here, nice
Would be nice when support also helps in other threads (sometime reading the manual isn't enough).
Maddin is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Using starToFoam clo OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 33 September 26, 2012 04:04
STAR CMM+ vs STAR CD jovandoric STAR-CD 0 April 27, 2010 09:47
StarToFoam error Kart OpenFOAM Meshing & Mesh Conversion 1 February 4, 2010 05:38
error in star ccm maurizio CD-adapco 3 October 16, 2007 05:17
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15


All times are GMT -4. The time now is 02:40.