CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

modelling particle curtain

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 21, 2012, 03:15
Default modelling particle curtain
  #1
New Member
 
sepideh
Join Date: Jul 2011
Posts: 21
Rep Power: 6
sepidecent is on a distinguished road
Im modelling heat transfer of sand particles in ambient air in a rectangular box with E-E approach.At the top of the box there is slot in which particles falling down and the size of the slot is 10 mm,and the box size is 450*900*225mm.
The problem is in my geometry when I'm measuring everything to make sure that the slot is in the middle of the box,everything is symmetric at both side.But in my results when I put the line at the middle of the box,the middle line is not at the middle of the slot.I don't know if the slot is not in the middle of the box or the line.But the coordinates are ok for both.
This problem makes the particles curtain unsymmetric!
I was wondering if anybody could help me.
sepidecent is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Blood Damage Modelling via Particle Tracking in a Centrifugal Heart Pump scatman CFX 5 May 5, 2011 07:23
Modelling particle flow MacWnc FLUENT 0 June 17, 2010 04:06
DPM UDF particle position using the macro P_POS(p)[i] dm2747 FLUENT 0 April 17, 2009 01:29
particle transfer modelling pankaj CFX 0 January 10, 2008 02:03
particle tronsport modelling Amara Mohamed CFX 0 November 6, 2003 04:09


All times are GMT -4. The time now is 20:17.