CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

ERROR IN TurboGrid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 9, 2013, 14:50
Default ERROR IN TurboGrid
  #1
New Member
 
Join Date: Jan 2013
Posts: 17
Rep Power: 4
mansoor is on a distinguished road
For import the geometry that is created in bladegen to the turbogrid this error is accord:
This is the picture of error:

http://www.mediafire.com/view/?sqc1q4tigx873m0

What's the problem?

Thank you

Last edited by mansoor; March 10, 2013 at 03:28.
mansoor is offline   Reply With Quote

Old   March 11, 2013, 01:09
Default
  #2
New Member
 
Join Date: Jan 2013
Posts: 17
Rep Power: 4
mansoor is on a distinguished road
This is the context of error:
ERROR
HUB gimensions,993.804, are outside of the ideal range (0.2-200).
without corrective action , serious geometry and mesh generation problems may result.
Try using different base units for machine data.
ERROR
SHROUD gimensions,948.271, are outside of the ideal range (0.2-200).
without corrective action , serious geometry and mesh generation problems may result.
More...

THANKS
mansoor is offline   Reply With Quote

Old   March 11, 2013, 04:46
Default
  #3
Member
 
Ludvik Lanicek
Join Date: Apr 2009
Location: Czech Republic
Posts: 52
Rep Power: 9
Ludvik is on a distinguished road
This isn't error. Just edit "Base Units" in Machine Data or "Length Units" in Hub, Shroud, Blade Set.
Ludvik is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] TurboGrid - problem with trailing edges ending with hub/shroud curve TTM ANSYS Meshing & Geometry 5 May 13, 2015 11:08
Importing ICEM mesh in TurboGrid ayothicfd Main CFD Forum 0 October 8, 2011 10:23
confused with meshing pump with turbogrid eng_norouzi ANSYS Meshing & Geometry 0 August 19, 2011 14:02
Axial blade simulation, TurboGrid a must? Gentry CFX 1 March 19, 2009 11:20
Meshing or Topology generation error in TurboGrid? jetcheve CFX 2 September 30, 2008 09:35


All times are GMT -4. The time now is 00:04.