CFD Online Logo CFD Online URL
Home > Forums > CFX

flagellar simple model

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 29, 2013, 20:22
Post flagellar simple model
New Member
Won Yeol, Choi
Join Date: Apr 2013
Posts: 4
Rep Power: 4
euwio1 is on a distinguished road
I tried to do cfx...about simple model . but error occurred...below

ERROR #002100080 has occurred in subroutine CHECK_NORMV. |
| Message: |
| The specified velocity vector on the boundary patch |
| |
| flagellar |
| |
| has a significant normal component at one or more faces. One of |
| these face locations is |
| |
| (x,y,z) = (-1.28645E-05, 7.93950E-06, 2.45104E-05). |
| |
| The angle between the specified velocity and the element surface is|
| 21.089 degrees at this face. This is considered an error because |
| it implies that the mesh is moving. The following are possible |
| reasons for the error message: |
| 1. There is a setup error; for example, an incorrect axis of |
| rotation. |
| 2. There may be a meshing problem; for example, the nodes on a |
| rotating surface might not lie on the surface of revolution. |
| 3. The boundary is curved and the mesh is very coarse. In this |
| case, you may modify the tolerance by increasing the |
| expert parameter 'tangential vector tolerance wall' |
| from its default of 20 degrees.

solid part is wall rotating at an angular velocity.
and outlet applies to opening, the oters are general wall.
and it is filled with water.
Attached Images
File Type: jpg Fluid Flow CFX.jpg (23.5 KB, 10 views)
euwio1 is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Use of k-epsilon and k-omega Models Jade M Main CFD Forum 12 June 2, 2015 13:16
Is it possible to model natural convection in a 2D horizontal model in fluent caitoc FLUENT 1 May 5, 2014 13:32
eddy dissipation model: combustion doesn't occur roukaia FLUENT 0 December 25, 2011 14:50
eddy dissipation model: combustion doesn't occur roukaia FLUENT 0 December 24, 2011 10:10
Simple 1D Stress FE Model Jonny6001 Main CFD Forum 1 March 25, 2010 06:22

All times are GMT -4. The time now is 10:35.