interfaces

cristian reyes · November 12, 2014, 21:52

hola estoy intentando simular un ventilador dentro de un ducto, pero algo va mal ya que tengo problemas en la interface, como se puede observar en la imagen cuando entra al siguiente dominio este cambia de sentido el giro.

inteer.jpg

ghorrocks · November 12, 2014, 23:16

CFD online forums are in English. Please post in English.

Your question is an FAQ: http://www.cfd-online.com/Wiki/Ansys...f_reference.3F

cristian reyes · November 12, 2014, 23:28

There is a way to have solid fan and this is rotating????

ghorrocks · November 13, 2014, 00:31

CFX has lots of models for rotating machines. If you just want to rotate the fan the simple rotating frame of reference model will do it. Or do you want to do something more complex than that?

cristian reyes · November 13, 2014, 11:21

i want to simulate a wind tunnel

cristian reyes · November 13, 2014, 16:56

do you have a totorials of machine rotative????

ghorrocks · November 13, 2014, 17:30

CFX comes with many tutorial examples of rotating machinery. Have a look in the CFX tutorial manual.

cristian reyes · November 13, 2014, 20:29

in ansys help-CFX- Tutorials there are not

November 12, 2014, 21:52	interfaces	#1
cristian reyes New Member Cristian reyes Join Date: Oct 2014 Posts: 6 Rep Power: 11	hola estoy intentando simular un ventilador dentro de un ducto, pero algo va mal ya que tengo problemas en la interface, como se puede observar en la imagen cuando entra al siguiente dominio este cambia de sentido el giro. inteer.jpg

November 12, 2014, 23:16		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	CFD online forums are in English. Please post in English. Your question is an FAQ: http://www.cfd-online.com/Wiki/Ansys...f_reference.3F cristian reyes likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What type is defined as the interfaces between stator and stator on OF-2.1.1?	renyun0511	OpenFOAM Running, Solving & CFD	3	May 18, 2013 08:11
Interpolation of data on interfaces during initialization	Chander	CFX	7	August 16, 2011 12:15
Numerical inaccuracy at domain interfaces in CFX	Chander	CFX	2	March 24, 2011 07:52
Subdomain or Interfaces (CHT)	sandeep_tu	CFX	8	July 14, 2009 11:06
grid interfaces	kiko	FLUENT	0	February 13, 2007 10:28

November 12, 2014, 23:28		#3
cristian reyes New Member Cristian reyes Join Date: Oct 2014 Posts: 6 Rep Power: 11	There is a way to have solid fan and this is rotating????

November 13, 2014, 00:31		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	CFX has lots of models for rotating machines. If you just want to rotate the fan the simple rotating frame of reference model will do it. Or do you want to do something more complex than that?

November 13, 2014, 11:21		#5
cristian reyes New Member Cristian reyes Join Date: Oct 2014 Posts: 6 Rep Power: 11	i want to simulate a wind tunnel

November 13, 2014, 16:56		#6
cristian reyes New Member Cristian reyes Join Date: Oct 2014 Posts: 6 Rep Power: 11	do you have a totorials of machine rotative????

November 13, 2014, 17:30		#7
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	CFX comes with many tutorial examples of rotating machinery. Have a look in the CFX tutorial manual.

November 13, 2014, 20:29		#8
cristian reyes New Member Cristian reyes Join Date: Oct 2014 Posts: 6 Rep Power: 11	in ansys help-CFX- Tutorials there are not