 |
 |
 |
|
|
|
[Sponsors] | ||||
|
|
March 17, 2001, 13:47
|
Eulerian model
|
#1 |
|
Guest
Posts: n/a
|
Does anyone know how to set up Eulerian model for gas -solid phase in CFX 5.4? What is the limitation of this model?
Thanks |
|
|
||
|
March 19, 2001, 23:01
|
Re: Eulerian model
|
#2 |
|
Guest
Posts: n/a
|
First you need CFX-5.4.1. Once you have that then you can setup a 2 phase problem. Setup one phase as continuous, and the second phase as disperse solid particles. This model is generally good up to 20% disperse phase volume fractions. So as long as you don't get much pooling of the solid phase you should be ok.
Dan. |
|
|
|
||
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Superlinear speedup in OpenFOAM 13 | msrinath80 | OpenFOAM Running, Solving & CFD | 18 | March 3, 2015 05:36 |
| question about eulerian model for packed bed | rone | FLUENT | 2 | July 19, 2007 20:58 |
| Mass and het transfer using eulerian model | Pablo | FLUENT | 0 | February 16, 2007 08:36 |
| the Eulerian model and the lower volume fraction | hx li | FLUENT | 2 | October 27, 2005 06:17 |
| Strain Rate in eulerian model | galeazzo | FLUENT | 0 | January 25, 2005 07:52 |
Hybrid Mode
