CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

PLOT3D for TascFlow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 5, 2001, 16:50
Default PLOT3D for TascFlow
  #1
Alan M. Shih
Guest
 
Posts: n/a
Hi, Is there anyway for Tascflow to read PLOT3D mesh? Does anyone has the converter routine for it?

Thanks.

Alan
  Reply With Quote

Old   July 5, 2001, 21:52
Default Re: PLOT3D for TascFlow
  #2
Robin Steed
Guest
 
Posts: n/a
Hi Alan,

Use TASCu2s to convert Plot3D and others into TASCflow grd format. It is accessible from the tools menu on the launcher or the TASCflow GUI.

TASCu2s can also be used to re-block existing meshes, reducing the number of blocks to a the minimum required for the given topology. Reducing the number of blocks can significantly reduce computational effort.

Regards, Robin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mapping plot3d data Fransje OpenFOAM Pre-Processing 2 July 13, 2010 06:02
Plot3D to CFX post-processor? bg2k6 CFX 2 September 26, 2009 21:06
PLOT3D Equations Alfonso Villanueva Main CFD Forum 1 June 23, 2005 16:51
Gambit - PLOT3D Danny Tan FLUENT 0 December 26, 2001 01:43
Plot3d grids > Gambit > Fluent 5 David C FLUENT 1 February 16, 2001 17:29


All times are GMT -4. The time now is 13:15.